GB 449-1984
Replaced
GB/T 1927.16-2022
Active
National standards
GB/T 1927.16-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 16:Method of testing in shearing strength parallel to grain of wood
GB/T 1927.16-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 16:Method of testing in shearing strength parallel to grain of wood
Basic Information
Standard Code:
GB/T 1927.16-2022
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Raw logs and original timber
ICS Name:
\nTimber, logs, and sawn timber
Publish Date:
2022-07-11
Implement Date:
2023-02-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国木材标准化技术委员会(SAC/TC 41)
Pages:
9 pages
Scope
本文件描述了测定生材状态或气干状态木材顺纹抗剪强度的试验设备、试件、试验步骤和结果计算。本文件适用于无疵小试样木材的顺纹抗剪强度试验。
Development Information
Drafting Units:
安徽农业大学、南京林业大学、宿州学院、厦门明红堂工艺品有限公司、红木枋家居科技(湖州)有限公司、浙江世友木业有限公司、中国林业科学研究院木材工业研究所、国际竹藤中心、东北林业大学
Drafting Persons:
王传贵、李荣荣、张训亚、钟永、任海青、张双燕、江泽慧、费本华、汪佑宏、刘镇波、黄灿、张超、陈震乾
Same series standard
GB/T 1927.11-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 11:Determination of ultimate stress in compression parallel to grain
GB/T 1927.13-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 13:Determination of the modulus of elasticity in compression perpendicular to grain
GB/T 1927.14-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 14:Determination of tensile strength parallel to grain
GB/T 1927.15-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 15:Determination of tensile strength perpendicular to grain
GB/T 1927.21-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 21:Determination of nail and screw holding power
Replace the following standards
Referenced Standards
GB/T 1927.2-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 2:Sampling methods and general requirements
GB/T 1927.4-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 4:Determination of moisture content
LY/T 1788-2008 Standard terminology relating to wood properties
Adopt standards
ISO 3347:1976
Related Standards
GB 4814-1984
Replaced
GB 4814-1984 Log volume table
GB 4815-1984
Replaced
GB 4815-1984 Volume table of Chinese fir tree poles
GB/T 11717-1989
Replaced
GB/T 11717-1989 Pulp logs
GB/T 1930-1991
Replaced
GB/T 1930-1991 Method for determination of the annual rings width and latewood rate of wood
GB/T 15106-1994
Replaced