T/SZMES 5-2024 Active Group standards

T/SZMES 5-2024 Two-plate cold chamber die casting machine

Publish Date: 2022-12-31 Implement Date: 2022-12-31 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/SZMES 5-2024

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: -

ICS Name: Molding equipment and casting equipment

Publish Date: 2022-12-31

Implement Date: 2022-12-31

Scope

Scope: This document specifies the structural parameters, precision, and technical requirements of two-plate cold chamber die-casting machines (hereinafter referred to as "two-plate die-casting machines"), describes their inspection methods and rules, and stipulates their marking, packaging, transportation, and storage. This document applies to the development, design, manufacturing, and use of two-plate cold chamber die-casting machines. It does not apply to other types of die-casting machines. Main technical content: 6.1 Technical requirements 6.1.1 Two-plate die-casting machines shall comply with the requirements of this standard and be manufactured in accordance with the drawings and technical documents approved by the prescribed procedures. 6.1.2 Two-plate die-casting machines shall have manual, semi-automatic, and automatic working modes. 6.1.3 The movements of moving parts shall be correct, smooth, and reliable. When the pressure of the hydraulic system is 25% of the rated value, there shall be no creep, jamming, or obvious impact phenomena (except for the mold-changing action). 6.1.4 Hydraulic systems and hydraulic components shall comply with the relevant provisions of GB/T 3766 and GB/T 7935. 6.1.5 The electrical system shall comply with the relevant provisions of GB 5226.1-2019. 6.1.6 The pneumatic system shall comply with the relevant provisions of GB/T 7932. 6.1.7 There shall be nameplates and indicative operation, lubrication, and safety labels for the hydraulic and pneumatic systems on two-plate die-casting machines. The content and markings of the nameplates and labels shall be correct and comply with the relevant standards. The nameplates shall comply with the provisions of GB/T 13306. Clear factory names and trademarks are allowed to be inlaid or cast on two-plate die-casting machines. 6.1.8 Two-plate die-casting machines shall have a reliable centralized lubrication system and shall have detection functions and audible and v