HB 2430-1979 long blade milling cutter with diameter D = 14~50mm

HB 4576-1992 The slot milling cutter for two-tooth end mill with a diameter range of 40-56mm HB 4577-1992 The inspection of the two-tooth milling cutter slot with template and calibration template is for detecting HB 4576-92 slot milling cutters HB 4578-1992 Three tooth straight milling cutter with slot cutter D=28～63mm HB 4579-1992 - A template and a check template for three-tooth end mills and slot mills. Used for inspecting HB 4578-92 slot mills HB 4580-1992 Four-tooth vertical milling cutter for grooving, with a diameter of 40 to 75 mm. HB 4581-1992 - Patterns and calibration templates for four-tooth end mills and slot mills. Used for inspecting HB 4580-92 slot mills HB 4582-1992 Six-tooth vertical milling cutter for grooving, with a diameter of 56 to 80 mm. HB 4583-1992 The sample and check sample for hob of six-tooth surface milling cutter used in HB 4582-92 slot milling cutter are for inspection HB 4584-1992 Slot milling cutter for eight-tooth end mills, with a diameter of 75-90mm. HB 4585-1992 Rake cutter slot milling cutter check template for H B 4584-92 slot milling cutter HB 4586-1992 Grinding template and inspection template for two-tooth vertical milling cutter for light alloys HB 4587-1992 Cutting tool for processing light alloy two-tooth vertical mill with slot mill D=30～75mm HB 4588-1992 - Standards for templates and inspection templates used in the processing of light alloy two-tooth end mills and slot milling cutters. Inspection standards for HB 4587-92 slot milling cutters. HB 4589-1992 Processing light alloy two-tooth vertical milling cutter back-off tool with diameter D=56～63mm HB 4590-1992 Processing light alloy two-tooth vertical milling cutter back-offset tool sample and calibration sample for inspection HB 4589-92 slot milling cutter use HB 4591-1992 Tool for milling three-tooth straight end mill with cutout D=45～80mm HB 4592-1992 - Standards for templates and calibration templates used in the machining of three-tooth end mills for light alloys. Inspection standards for HB 4591-92 end mills HB 4593-1992 slot milling cutter for collet end mills D=63～100mm HB 4594-1992 The template and calibration template for slot milling cutters with pattern milling cutters are used to detect HB 4593-92 slot milling cutters HB 4595-1992 The slot milling cutter used for processing light alloy shell-type vertical milling cutter with a diameter of D=63～80mm HB 4596-1992 Processing light alloy shank milling cutter template and calibration template for slot milling cutters, inspecting HB 4595-92 slot milling cutter use HB 4597-1992 The milling cutter for processing light alloy cylindrical milling cutter with a depth of cut of D=71～80mm HB 4598-1992 Processing light alloy cylindrical milling cutter slot milling cutter template and calibration template for detecting HB 4597-92 slot milling cutter HB 4599-1992 Sleeving mill cutter 5° slot for slot mill cutter with diameter D=100～125mm HB 4600-1992 The tapping drill for processing aluminum alloy with a slot milling cutter with a diameter of D=35～63mm HB 4601-1992 Processing aluminum alloy reaming drill slot milling cutter and checking template to detect HB 4600-92 slot milling cutter HB 4602-1992 Two-tooth ordinary straight end mill with diameter ranging from 3 to 20mm HB 4603-1992 Three-tooth ordinary straight-blade milling cutter d=3～28mm HB 4604-1992 Three-tooth end-cutting straight center-hole milling cutter with diameter of 10-25mm HB 4605-1992 Double-headed three-tooth straight-blade milling cutter with diameter ranging from 10 to 25 mm HB 4620-1992 Four-tooth endless gear left-handed Mollis taper handle jig milling cutter, with a diameter of 12 to 18 mm. HB 4621-1992 Hex-tooth No-tip Tool Tip left-handed screw cutter molding adze type milling cutter D=20-50mm HB 4622-1992 is a six-tooth Morse taper-shank end mill with rollers, suitable for face milling, with a diameter of 16 to 50 mm. HB 4623-1992 Two-tooth straight-handle milling cutter for light alloys with diameter d=1.5～20mm HB 4606-1992 Four-tooth ordinary straight-shank end mill, with a diameter of 6 to 40 mm. HB 4607-1992 Six-tooth ordinary straight end mill with diameter from 16 to 40mm HB 4608-1992 Two-tooth straight-handle milling cutter with a diameter of 6-20mm HB 4609-1992 Three-tooth straight-handle milling cutter with flat blade, d=6～28mm HB 4610-1992 four-tooth straight-blade end mill with a diameter of 6 to 50mm HB 4611-1992 Double-headed four-tooth straight-handle milling cutter with flat blade, diameter d = 10～20mm HB 4612-1992 Four-tooth end-cut flat straight-handle milling cutter with diameter of 20 to 45mm HB 4613-1992 Six-tooth straight-shank milling cutter with flat face d=16～71mm HB 4614-1992 Eight-tooth straight milling cutter with flat end (diameter from 32 to 71mm) HB 4615-1992 Three-tooth Morse taper shank end mill, with a diameter of 14 to 28 mm. HB 4616-1992 Three-tooth end mill with center-offset metric tapers d=14～28mm HB 4617-1992 Four-tooth Morse cone milling cutter with diameter ranging from 14 to 50 mm HB 4618-1992 Six-tooth Morse taper shank end mill, with a diameter of 16 to 63 mm. HB 4619-1992 Hexagon-tooth Meisheck broach with a diameter of 32-63mm HB 4624-1992 Milling cutter for light alloys with two-tooth Meissner conical shank, d=12～50mm HB 4625-1992 Three-tooth Meissner cone-end mill for light alloys with diameter from 14 to 50 mm HB 4626-1992 Milling cutter with double-tooth metric conical shank and ball-headed for light alloys, with a diameter range of 8-50mm HB 4627-1992 Brazed carbide cutter with double-sided cutting edges for milling, with a diameter of 100-315mm (for large holes) HB 4628-1992 Brazed Carbide Blade Serrated Face Milling Tool with Double Sided Blades D=100～315mm (Small Hole) HB 4629-1992 Miter Diameter 3-Flute Cutting Tool with Carbide Tip for Milling Hole Size 100-180mm (Large) HB 4630-1992 Brazed Carbide Cutting Tool with Three-Face Milling Tool, Diameter 200-315mm (Large Hole) HB 4631-1992 Hardened cemented carbide insert blade welding tritool for milling cutter D=100-180mm(small bore) HB 4632-1992 Brazed Carbide Insert Three-Face Milling Tool