GB/T 3215-1982
Replaced
GB/T 5662-2013
Active
National standards
GB/T 5662-2013 End-suction centrifugal pumps(rating 1.6 MPa)—Designation,nominal duty point and dimensions
GB/T 5662-2013 End-suction centrifugal pumps(rating 1.6 MPa)—Designation,nominal duty point and dimensions
Basic Information
Standard Code:
GB/T 5662-2013
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
pump
ICS Name:
pump
Publish Date:
2013-12-17
Implement Date:
2014-10-01
Pages:
8 pages
Scope
This standard specifies the marking, performance, and dimensions of axial suction centrifugal pumps (hereinafter referred to as pumps), as well as their hydrostatic pressure testing.
This standard applies to pumps with a maximum working pressure of 1.6 MPa.
Development Information
Replace the following standards
Referenced Standards
GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 1:Parallel internal and taper external threads
GB/T 7306.2-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 2:Taper internal and external threads
Related Standards
GB/T 5660-1985
Replaced
GB/T 5660-1985 End-suction centrifugal pumps—Baseplate and installation dimensions
GB/T 5661-1985
Replaced
GB/T 5661-1985 End-suction centrifugal pumps—Dimensions of cavities for mechanical seals and for soft packing
GB/T 5662-1985
Replaced
GB/T 5662-1985 End-suction centrifugalpumps (rating 16 bar)—Designation, nominal duty point and dimensions
GB/T 6490.1-1986
Replaced
GB/T 6490.1-1986 Terms and definitions of water-turbine pumps
GB/T 6490.2-1986
Replaced