GB/T 22359.1-2022 Active National standards

GB/T 22359.1-2022 Earth-moving and building construction machinery—Electromagnetic compatibility(EMC) of machines with internal electrical power supply—Part 1:General EMC requirements under typical electromagnetic environmental conditions

Publish Date: 2022-10-12 Implement Date: 2022-10-12 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 22359.1-2022

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Construction engineering construction machinery

ICS Name: Earthmoving machinery

Publish Date: 2022-10-12

Implement Date: 2022-10-12

Publisher: 国家市场监督管理总局、国家标准化管理委员会

Technical Committee: 全国土方机械标准化技术委员会(SAC/TC 334)

Pages: 43 pages

Scope

本文件规定了评估GB/T 8498-2017定义的土方机械和ISO/TR 12603：2010定义的下列建筑施工机械的电磁兼容性(EMC)的试验方法和验收准则：--钻探及基础施工设备；--混凝土和灰浆的制备、输送、捣实设备及钢筋加工设备；--道路施工与养护机械设备。本文件涉及典型电磁环境条件下的EMC一般要求(GB/T 22359.2-2022涉及与功能安全相关的EMC附加要求)。本文件涉及安装在机械上的电气/电子器件(ESA)和与机械分离的ESA。评估下列电磁骚扰现象：--宽带和窄带电磁干扰；--电磁场抗扰度；--静电放电；--瞬态传导。机械可能由DC、AC或者两者组合作为内部电源系统。本文件不适用于由外部电网供电的机器或作为军事应用的设备。

Development Information

Drafting Units:

福建省闽旋科技股份有限公司、斗山工程机械(中国)有限公司、山东临工工程机械有限公司、厦门厦工机械股份有限公司、天津工程机械研究院有限公司、中冶京诚(湘潭)矿山装备有限公司、广西柳工机械股份有限公司、山河智能装备股份有限公司

Drafting Persons:

刘嘉华、雷明、杨久虎、王文龙、刘佼、沈飘飘、黄遂、郝鹏、陈惠玲

Word Count: 86 Thousand words Pages: 43 pages

Same series standard

GB/T 22359.2-2022 Earth-moving and building construction machinery—Electromagnetic compatibility(EMC) of machines with internal electrical power supply—Part 2:Additional EMC requirements for functional safety

Replace the following standards

GB/T 22359-2008 Earth-moving machinery—Electromagnetic compatibility

Referenced Standards

GB/T 6113.104-2016 Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4:Radio disturbance and immunity measuring apparatus—Antennas and test sites for radiated disturbance measurements GB/T 8498-2017 Earth-moving machinery—Basic types—Identification and terms and definitions GB/T 15706-2012 Safety of machinery—General principles for design—Risk assessment and risk reduction ISO 7637-1:2015 ISO 7637-2:2011 ISO 10605:2008 ISO 11451-1:2015 ISO 11451-2:2015 ISO 11451-4:2013 ISO 11452-1:2015 ISO 11452-2:2004 ISO 11452-3:2016 ISO 11452-4:2011 ISO 11452-5:2002 ISO/TR 12603:2010 ISO 16750-1:2006 ISO 16750-2:2012 ISO 21848:2005 CISPR 12:2007+AMD1:2009 CISPR 16-1-1:2014 CISPR 25:2008