GB/T 22148-2008
Replaced
GB/T 17625.8-2025
Active
National standards
GB/T 17625.8-2025 Electromagnetic compatibility—Limits—Part 8:Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current ＞16 A and ≤75 A per phase
GB/T 17625.8-2025 Electromagnetic compatibility—Limits—Part 8:Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current ＞16 A and ≤75 A per phase
Price:
$ 84
Basic Information
Standard Code:
GB/T 17625.8-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electromagnetic compatibility
ICS Name:
Launch
Publish Date:
2025-12-31
Implement Date:
2026-07-01
Pages:
28 pages
Scope
This document concerns the harmonic current limits for equipment connected to public power supply systems. The limits given in this document apply to electrical and electronic equipment with a rated input current of more than 16 A and less than or equal to 75 A per phase, which are intended to be connected to the following types of public low-voltage AC distribution systems:
a) Nominal voltage 220 V and below, single-phase, two-wire or three-wire system;
b) Nominal voltage 380 V and below, three-phase, three-wire or four-wire system;
c) Nominal frequency 50 Hz.
The limits given in this document (see Chapter 5) apply to equipment connected to 220 V/380 V, 50 Hz systems. Equipment connected to other distribution systems is not included in this scope.
Note 1: Limits applicable to other systems will be added in future versions of this document.
Note 2: In the harmonic current requirements of facilities, equipment with a rated input current exceeding 75 A per phase is considered. See IEC TR 61000-3-6 and IEC TR 61000-3-14.
This document applies to equipment intended to be connected to low-voltage public systems, not to equipment intended to be connected to private low-voltage systems only connected to medium- or high-voltage public power supply systems.
Note 3: The scope of this document is limited to equipment connected to public low-voltage systems, because emissions from equipment installed in private low-voltage systems will be subject to the procedures specified in IEC TR 61000-3-6 at medium-voltage public connection points, and/or to overall control through agreements between the power supply department and users. It is expected that operators of private systems will manage the electromagnetic compatibility environment in a manner that ensures compliance with the provisions of IEC TR 61000-3-6 and/or contractual agreements.
Note 4: If the equipment is only connected to private systems, the manufacturer shall in
Development Information
Replace the following standards
Referenced Standards
GB/T 4365-2024 Electrotechnical terminology—Electromagnetic compatibility
GB 17625.1-2022 Electromagnetic compatibility—Limits—Part 1:Limits for harmonic current emissions(equipment input current ≤16 A per phase)
IEC 60038
IEC 61000-2-2
IEC 61000-2-4
IEC 61000-4-7
Adopt standards
IEC 61000-3-12:2021
Related Standards
GB 17625.1-2012
Replaced
GB 17625.1-2012 Electromagnetic compatibility—Limits—Limits for harmonic current emissions(equipment input current ≤16 A per phase)
GB/T 17625.7-2013
Active
GB/T 17625.7-2013 Electromagnetic compatibility—Limits—Limitation of voltage changes,voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current≤75 A and subject to conditional connection
GB/T 17626.20-2014
Active
GB/T 17626.20-2014 Electromagnetic compatibility—Testing and measurement techniques—Emission and immunity testing in transverse electromagnetic(TEM) waveguide
GB/T 17626.21-2014
Active
GB/T 17626.21-2014 Electromagnetic compatibility—Testing and measurement techniques—Reverberation chamber test methods
GB/T 17625.8-2015
Replaced