GB/T 13576.3-2008 Active National standards

GB/T 13576.3-2008 Buttress threads with the flank angles of 3 and 30 degrees—Part 3:Basic dimensions

Publish Date: 2008-07-30 Implement Date: 2009-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 13576.3-2008

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Basic standards and general methods

ICS Name: Special screw threads

Publish Date: 2008-07-30

Implement Date: 2009-02-01

Pages: 9 pages

Scope

This part of GB/T 13576 specifies the basic dimensions of serrated threads. The tooth profile and diameter of serrated threads, as well as the pitch series, comply with the provisions of GB/T 13576.1 and GB/T 13576.2, respectively. This part is applicable to mechanical transmissions and fastening serrated thread connections for general purposes.

Development Information

Word Count: 15 Thousand words Pages: 9 pages

Same series standard

GB/T 13576.1-2008 Buttress threads with the flank angles of 3 and 30 degrees—Part 1:Profiles GB/T 13576.2-2008 Buttress threads with the flank angles of 3 and 30 degrees—Part 2:General plan GB/T 13576.4-2008 Buttress threads with the flank angles of 3 and 30 degrees—Part 4:Tolerances

Replace the following standards

GB/T 13576.3-1992 Buttress threads with 3 and 30 degrees flank angle—Basic dimensions

Referenced Standards

GB/T 13576.1-1992 Buttress threads with 3 and 30 degrees flank angle—Profiles GB/T 13576.1-2008 Buttress threads with the flank angles of 3 and 30 degrees—Part 1:Profiles GB/T 13576.2-1992 Buttress threads with 3 and 30 degrees flank angle—General plan GB/T 13576.2-2008 Buttress threads with the flank angles of 3 and 30 degrees—Part 2:General plan GB/T 14791-1993 The terms of screw threads GB/T 14791-2013 Screw threads—Vocabulary

Related Standards

GB/T 12359-1990 Replaced

GB/T 12359-1990 Limits of sizes for metric trapezoidal screw threads

Publish Date: 1990-06-14

GB/T 7306.1-2000 Active

GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 1:Parallel internal and taper external threads

Publish Date: 2000-07-24

GB/T 7306.2-2000 Active

GB/T 7306.2-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 2:Taper internal and external threads

Publish Date: 2000-07-24

GB/T 7307-2001 Active

GB/T 7307-2001 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads

Publish Date: 2001-02-26

GB/T 12716-2002 Replaced

GB/T 12716-2002 Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on the threads

Publish Date: 2002-03-10

GB/T 13576.1-2008 Active

GB/T 13576.1-2008 Buttress threads with the flank angles of 3 and 30 degrees—Part 1:Profiles

Publish Date: 2008-07-30