GB 15599-1995
Replaced
GA/T 536.1-2005
Replaced
Industry standards-Public safety
GA/T 536.1-2005 Grading and test method on fire hazard for flammable and explosive hazmats—Part 1:Grading on fire hazard for flammable and explosive hazmats
GA/T 536.1-2005 Grading and test method on fire hazard for flammable and explosive hazmats—Part 1:Grading on fire hazard for flammable and explosive hazmats
Basic Information
Standard Code:
GA/T 536.1-2005
Standard Type:
Industry standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Fire fighting
ICS Name:
\nFire protection integrated system
Publish Date:
2005-03-17
Implement Date:
2005-10-01
Pages:
5 pages
Scope
This part of GA/T 536 specifies the grading values for the classification of flammable and explosive dangerous goods with fire hazards, as well as the classification test methods. This part is applicable to the determination of flammable and explosive dangerous goods with fire hazards.
Development Information
Same series standard
GA/T 536.2-2005 Grading and test method on fire hazard for flammable and explosive hazmats—Part 2:Test method of grading for flammable solids
GA/T 536.3-2005 Grading and test method on fire hazard for flammable and explosive hazmats—Part 3:Test method of grading for substances liable to spontaneous combustion
GA/T 536.4-2005 Grading and test method on fire hazard for flammable and explosive hazmats—Part 4:Test method of grading for substances which in contact with water emit flammable gases
GA/T 536.5-2005 Grading and test method on fire hazard for flammable and explosive hazmats—Part 5:Test method of grading for oxidizing solids
Superseded by the following standards
Referenced Standards
GB/T 3776.5
GB/T 6753.5
GB/T 261-1983 Petroleum products—Determination of flash point—Closed cup method
GB/T 261-2008 Determination of flash point—Pensky-Martens closed cup method
GB/T 261-2021 Determination of flash point—Pensky-Martens closed cup method
GB/T 5208-1985 Coatings—Flash point test—Rapid equilibrium method
GB/T 5208-2008 Determination of flash point—Rapid equilibrium closed cup method
GB 6944-1986 Classification and code of dangerous goods
GB 6944-2005 Classification and code of dangerous goods
GB 6944-2012 Classification and code of dangerous goods
GB/T 7634-1987 Petroleum and related products—Determination of lower flashpoint—Rapid equilibrium method
GB/T 12474-1990 Method of test for explosion limits of combustible gases in air
GB/T 12474-2008 Method of test for explosion limits of combustible gases in air
GA/T 536.2-2005 Grading and test method on fire hazard for flammable and explosive hazmats—Part 2:Test method of grading for flammable solids
GA/T 536.3-2005 Grading and test method on fire hazard for flammable and explosive hazmats—Part 3:Test method of grading for substances liable to spontaneous combustion
GA/T 536.4-2005 Grading and test method on fire hazard for flammable and explosive hazmats—Part 4:Test method of grading for substances which in contact with water emit flammable gases
GA/T 536.5-2005 Grading and test method on fire hazard for flammable and explosive hazmats—Part 5:Test method of grading for oxidizing solids
GA/T 536.6-2010 Grading and test method on fire hazard for flammable and explosive hazmats—Part 6:Test method of grading for oxidizing liquids
GB 6944-2025 Classification and code of dangerous goods
Related Standards
GB 15630-1995
Active
GB 15630-1995 Requirements for the placement of fire safety signs
GB 16806-1997
Replaced
GB 16806-1997 General technical conditions of control for fire protection equipment
GB 16807-1997
Replaced
GB 16807-1997 Fire intumescent seals
GB 16808-1997
Replaced
GB 16808-1997 Technical requirements and test methods for combustibic gas alarm control units
GB 16809-1997
Replaced