GB/T 14598.7-1995
Abolished
GB/T 2314-2008
Active
National standards
GB/T 2314-2008 General technical requirements for electric power fittings
GB/T 2314-2008 General technical requirements for electric power fittings
Basic Information
Standard Code:
GB/T 2314-2008
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Transmission line equipment
ICS Name:
Substations, surge arrestors
Publish Date:
2008-09-24
Implement Date:
2009-08-01
Pages:
10 pages
Scope
This standard specifies the general technical requirements for power fittings (hereinafter referred to as fittings) used in overhead power lines, substations, and power plant distribution devices in terms of design, manufacturing, and installation and use.
This standard applies to fittings used in overhead power lines, substations, and power plant distribution devices with a rated voltage of more than 35 kV. For fittings used in environments with severe corrosion, pollution, high altitude, and high-cold regions, they shall also meet the relevant provisions of other related standards.
Development Information
Replace the following standards
Referenced Standards
GB/T 196-2003 General purpose metric screw threads—Basic dimensions
GB/T 197-2003 General purpose metric screw threads—Tolerances
GB/T 197-2018 General purpose metric screw threads—Tolerances
GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications
GB/T 2315-2000 Nominal failing load series and coupling dimensions for electric power fittings
GB/T 2315-2008 Nominal failing load series and coupling dimensions for electric power fittings
GB/T 2315-2017 Specified failure load series and coupling dimensionsfor electric power fittings
GB/T 2317.1-2000 Mechanical tests for electric power fittings
GB/T 2317.1-2008 Test method for electric power fittings Part 1:Mechanical tests
GB/T 2317.2-2000 Corona and RIV tests for electric power fittings
GB/T 2317.2-2008 Test method for electric power fittings—Part 2:Corona and RIV tests for electric power fittings
GB/T 2317.3-2000 Heat cycle tests for electric power fittings
GB/T 2317.3-2008 Test method for electric power fittings—Part 3:Heat cycle tests for electric power fittings
GB/T 4056-1994 Coupling dimensions of suspension insulators for high voltage lines
GB/T 4056-2008 Ball and socket coupling dimensions of string insulator units
GB/T 4056-2019 Dimensions of ball and socket couplings of string insulator units
GB/T 5075-2001 Terminology for electric power fittings
GB/T 5075-2016 Terminology for electric power fittings
DL/T 768.7-2012 Electricity fittings manufacturing quality of steel parts hot-dip zinc coating
DL/T 1098-2016 DL/T 1098-2016 Interspace rod technical specification and test methods
DL/T 1099-2009 DL/T 1099-2009 Anti-vibration hammer technical specifications and testing methods
DL/T 768.7-2002 Electricity fittings manufacturing quality and hot-dip galvanized layer of steel parts
DL/T 1098-2009 DL/T 1098-2009 Interspacing Strips Technical Conditions and Test Methods
GB/T 196-2025 General purpose metric screw threads—Basic dimensions
Adopt standards
IEC 61284:1997
Related Standards
GB/T 15576-1995
Replaced
GB/T 15576-1995 The specifications of low-voltage reactive power steady compensation equipments
GB 8286-1996
Replaced
GB 8286-1996 Mining flameproof movable substations
GB/T 16896.1-1997
Replaced
GB/T 16896.1-1997 Digital recorders for measurements in high—Voltage impulse tests—Part 1:Requirements for digital recorders
GB 2314-1997
Replaced
GB 2314-1997 General technical requirements for electric power fittings
GB/T 17467-1998
Replaced