GB/T 12626.1-1990
Replaced
LY/T 2378-2014
Replaced
Industry standards-Forestry
LY/T 2378-2014 General technical specification of the woody biomass solid molding stove
LY/T 2378-2014 General technical specification of the woody biomass solid molding stove
Basic Information
Standard Code:
LY/T 2378-2014
Standard Type:
Industry standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Plywood
ICS Name:
Fiber and particleboard
Publish Date:
2014-08-21
Implement Date:
2014-12-01
Pages:
12 pages
Scope
This standard specifies the terms and definitions, classification, technical requirements, test methods, and inspection rules for wood biomass solid fuel stoves.
This standard applies to stoves that use wood biomass solid fuel (in the form of pellets, blocks, rods, etc.).
This standard does not apply to biomass stoves that employ a stove-separated, fully gasified combustion method.
Development Information
Superseded by the following standards
Referenced Standards
GB 16154-2005 General technical specification of civil water heating coal stove
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 5468-1991 Measurement method of smoke and dust emission from boilers
GB/T 13384-1992 General specifications for packagings of mechanical and electrical products
GB/T 13384-2008 General specifications for packing of mechanical and electrical product
GB/T 16155-1996 Testing method for thermal performance of domestic cooking-water heating coal stoves
GB/T 16155-2005 Test method for heating performance of civil water heating coal stove
GB/T 16155-2018 Test method for performance of civil water heating coal stove
HJ/T 42-1999 HJ/T 42-1999 Determination of nitrogen oxides in exhaust gas from stationary sources by UV spectrophotometry
HJ/T 43-1999 The determination of nitrogen oxides in exhaust gas from fixed pollution sources using naphthalene-ethylene diamine hydrochloride spectrophotometry
HJ/T 56-2000 The determination of sulfur dioxide in fixed pollution sources using iodometric method
HJ 57-2017 The determination of sulfur dioxide in fixed pollution source waste gas using potentiometric electrolysis
HJ/T 57-2000 The determination of sulfur dioxide in fixed pollution sources using electropolytic method
GB/T 16157-1996 Determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationary source
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB/T 12626.2-1990
Replaced
GB/T 12626.2-1990 Hard fibreboard—Technical requirement
GB/T 12626.3-1990
Replaced
GB/T 12626.3-1990 Hard fibreboard—Sampling and measurement of test pieces
GB/T 12626.4-1990
Replaced
GB/T 12626.4-1990 Hard fibreboard—Test code
GB/T 12626.5-1990
Replaced
GB/T 12626.5-1990 Hard fibreboard—Marking, packaging, transportation and reservation of the products
GB/T 12626.6-1990
Replaced