DL/T 2555.2-2023
Active
Industry standards-Electricity
DL/T 2555.2-2023 Distribution line bypass work equipment - Part 2: Bypass switches
DL/T 2555.2-2023 Distribution line bypass work equipment - Part 2: Bypass switches
Basic Information
Standard Code:
DL/T 2555.2-2023
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
High-voltage switchgear
ICS Name:
\nTransmission lines and distribution lines
Publish Date:
2023-05-26
Implement Date:
2023-11-26
Scope
This document specifies the environmental conditions for the use of bypass load switches, arc-extinguishing switches, and disconnecting switches in 10kV to 20kV overhead distribution lines during bypass operations, and describes the structure, electrical performance, and mechanical performance of the three types of switches. It also stipulates the technical requirements, test methods, and inspection rules for the three types of switches. This document is applicable to bypass load switches, arc-extinguishing switches, and disconnecting switches used in 10kV to 20kV overhead distribution lines during bypass operations in areas with an altitude of no more than 3,000 meters.
Development Information
Same series standard
DL/T 2555.3-2023 DL/T 2555.3-2023 Branch line bypass operation equipment and equipment Part 3: Bypass cable truck for distribution line
DL/T 2555.4-2023 DL/T 2555.4-2023 Distribution line bypass operation equipment and equipment Part 4: Mobile box trailer
DL/T 2555.5-2023 DL/T 2555.5-2023 Power Distribution Line Bypass Work Tools and Equipment Part 5: Mobile Loop Box Vehicles
DL/T 2555.6-2023 DL/T 2555.6-2023 Distribution line bypass operation tools and equipment Part 6: Mobile switch vehicles
DL/T 2555.7-2023 DL/T 2555.7-2023, Parallel route work tools and equipment for distribution lines - Part 7: Assist tools
Related Standards
GB 15632-1995
Replaced
GB/T 2900.51-1998
Active
GB/T 2900.51-1998 Electrotechnical Overhead lines
GB/T 2340-1998
Abolished
GB/T 2340-1998 T-connector
GB/T 2341-1998
Abolished
GB/T 2341-1998 Terminal clamp
GB/T 18037-2000
Replaced
GB/T 18037-2000 Technical requirements and design guide for live working tools
GB/T 2315-2000
Replaced