GB 12264-1990
Replaced
YY/T 0809.12-2020
Active
Industry standards-Medicine
YY/T 0809.12-2020 Implants for surgery—Partial and total hip joint prostheses—Part 12:Deformation test method for acetabular shells
YY/T 0809.12-2020 Implants for surgery—Partial and total hip joint prostheses—Part 12:Deformation test method for acetabular shells
Basic Information
Standard Code:
YY/T 0809.12-2020
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Orthopaedic surgery, orthopaedic instruments
ICS Name:
Surgical implants, prostheses, and orthoses
Publish Date:
2020-06-30
Implement Date:
2021-06-01
Publisher:
国家药品监督管理局
Technical Committee:
全国外科植入物和矫形器械标准化技术委员会骨科植入物分技术委员会(SAC/TC 110/SC 1)
Pages:
12 pages
Scope
YY/T 0809的本部分规定了在特定的实验室条件下，测量用于全髋关节置换的压配式髋臼部件短期形变的试验方法，也规定了测试条件，考虑了影响测试部件的重要参数，并且描述了试验样品的安装方法。此外，还规定了测试压配式髋臼部件的试验参数。 本试验方法适用于在相似试验条件下对用于全髋关节置换的不同髋臼部件的设计和材料进行对比、评估。 髋臼部件在体内的受力情况一般不同于本试验方法规定的受力情况。本试验得到的结果不能直接用于预测髋臼部件在体内的性能。 本部分不包括试验样品的检查方法。
Development Information
Drafting Units:
天津市医疗器械质量监督检验中心、北京爱康宜诚医疗器材有限公司、创生医疗器械(中国)有限公司、山东威高骨科材料股份有限公司、西北工业大学生命学院
Drafting Persons:
李文娇、董双鹏、王彩梅、魏崇斌、王剑、曹海鹏、鲁成林、陈成、付增祥
Same series standard
YY/T 0809.2-2020 Implants for surgery—Partial and total hip joint prostheses—Part 2:Articulating surfaces made of metallic,ceramic and plastics materials
YY/T 0809.13-2020 Implants for surgery—Partial and total hip joint prostheses—Part 13:Determination of resistance to torque of head fixation of stemmed femoral components
Referenced Standards
GB/T 12417.2-2008 Non-active surgical implants—Osteosynthesis and joint replacement implants—Part 2:Particular requirements for joint replacement implants
YY/T 0809.1-2010 Implants for surgery—Partial and total hip joint prostheses—Part 1:Classification and designation of dimensions
YY/T 0809.2-2010 Implants for surgery—Partial and total hip joint prostheses—Part 2:Articulating surfaces made of metallic,ceramic and plastics materials
YY/T 0809.2-2020 Implants for surgery—Partial and total hip joint prostheses—Part 2:Articulating surfaces made of metallic,ceramic and plastics materials
GB/T 12417.2-2025 Non-active surgical implants—Osteosynthesis and joint replacement implants—Part 2:Particular requirements for joint replacement implants
Adopt standards
ISO 7206-12:2016
Related Standards
GB 12279-1990
Replaced
GB 12279-1990 Cardiac valve prostheses general technical specification
GB 12417-1990
Replaced
GB 12417-1990 The general technological conditions of surgical metal implant
GB/T 13461-1992
Replaced
GB/T 13461-1992 Synthetic resin blow knee prostheses
GB/T 14191-1993
Replaced
GB/T 14191-1993 Terminology for prosthetics and orthotics
GB 14722-1993
Replaced