GB/T 2022-1980
Replaced
T/DASI 002-2019
Active
Group standards
T/DASI 002-2019 Floor slip resistance agent
T/DASI 002-2019 Floor slip resistance agent
Price:
$ 20.00
Basic Information
Standard Code:
T/DASI 002-2019
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Concrete, aggregates, mortar, and grout
ICS Name:
Cement, gypsum, lime, and mortar
Publish Date:
2019-02-27
Implement Date:
2019-03-01
Scope
Scope: This standard specifies the terms and definitions, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of ground anti-slip agents. This standard applies to ground anti-slip agents; Main technical content: (1) Determining the performance requirements of main technical indicators, test methods, and inspection rules. This standard is formulated by referring to the provisions of standards such as GB/T 3810.13 "Ceramic Tile Test Methods - Part 13: Determination of Chemical Corrosion Resistance," GB/T 3810.7 "Ceramic Tile Test Methods - Part 7: Determination of Wear Resistance of Glazed Tiles," GB/T 4100-2015 "Ceramic Tiles," GB 18582-2008 "Limitations on Harmful Substances in Interior Decoration Materials - Interior Wall Coatings," and JC/T 1050-2007 "Grade Classification and Test Methods for Anti-Slip Performance of Floor Stone Materials." (2) Performance indicators. Product indicators are formulated in accordance with the provisions of standards such as GB 50325-2010 (2013 Edition) "Code for Control of Indoor Environmental Pollution in Civil Buildings." 1. Static friction coefficient [Classification reference: JC/T 1050-2007]. The static friction coefficient is the most intuitive data for evaluating the friction force of flooring. The higher the value, the greater the friction force and the better the anti-slip effect. According to Chinese regulations, a ground with a static friction coefficient less than 0.5 is classified as unsafe, and a ground with a static friction coefficient of 0.5–0.79 is classified as safe. This standard considers various specific situations of floors and stipulates the static friction coefficient for different cases. All indicators are above 0.5, and some even reach 0.6, reflecting the product's performance with intuitive data and standardizing and ensuring product quality. 2. Resistance to salt, acid, and alkali. As coatings used on floors, different floors have different requirements f
Development Information
Related Standards
GB/T 177-1985
Abolished
GB/T 177-1985 Test method for strength of hydraulic cement mortar
GB/T 6645-1986
Replaced
GB/T 6645-1986 Granulated electric furnace phosphorous slag used for cement production
GB/T 7897.1-1987
Replaced
GB/T 7897.1-1987 Test method of mechanical properties of mortar for ferrocement General principle
GB/T 7897.2-1987
Replaced
GB/T 7897.2-1987 Test method of mechanical properties of mortar for ferrocement Test of bending strength
GB/T 7897.3-1987
Replaced