T/JSAS 060-2024 Intelligent container terminal and rail system construction specifications

Scope

Scope: This document specifies the requirements for the construction and acceptance of intelligent container yard rail systems. This document applies to the construction requirements of intelligent container yard rail systems; Main technical content: The following terms and definitions apply to this document. 3.1 Rail system A device composed of an upper plate, bolts, nuts, washers, rubber pads, sleeve bolts, locking washers, a base plate, pre-embedded plates, pre-embedded sleeves, rail angle pads, and rails. 4 Material requirements No. Name Specifications Notes 1 Upper plate GANTOM CRP130 Dacroma corrosion protection 2 Bolts M20×60 3 Nuts M20 4 Washers 20 5 Rubber pads GANTOM JD3-150 6 Sleeve bolts GANTOM M24x290 Dacroma corrosion protection 7 Locking washers GANTOM F-3-24 Dacroma corrosion protection 8 Base plate GANTOM GT150 Dacroma corrosion protection 9 Pre-embedded plates GANTOM DSP370 Polymer materials 10 Pre-embedded sleeves GANTOM ECP70-225 Polymer materials 11 Rail angle pads GANTOM N5P4 Polymer materials Rails QU100 Mud mortar ILINO STYLE positioning template Q235 5.1 Form and use of positioning templates See Figure 1 for the form and use of positioning templates. Figure 1 Positioning template 5.2 Determination of sleeve pre-embedding height Determine the height of the pre-embedded sleeve, then use connecting sleeves to fix the pre-embedded sleeve on the positioning template based on the centerline for precise positioning. Pour concrete and carry out curing. Figure 2 Sleeve pre-embedding 5.3 Installation of pre-embedded plates After pre-embedding and curing the sleeves, remove the positioning template, screw the connecting sleeves onto the pre-embedded sleeves, rotate the connecting sleeves to adjust the height of the disc surface to the lower surface of the pre-embedded plates, then put the pre-embedded plates onto the connecting sleeves. Confi

Development Information

Related Standards