GB/T 13931-2002
Replaced
GB/T 27871-2011
Active
National standards
GB/T 27871-2011 Sanitary landfill compactor
GB/T 27871-2011 Sanitary landfill compactor
Basic Information
Standard Code:
GB/T 27871-2011
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Environmental protection equipment
ICS Name:
Waste disposal and treatment equipment and devices
Publish Date:
2011-12-30
Implement Date:
2012-09-01
Pages:
13 pages
Scope
This standard specifies the terms and definitions, classification, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage of landfill compactors used for landfill operations (hereinafter referred to as compactors).
This standard applies to compactors with a working weight of ≤36 tons. Compactors with a working weight of >36 tons may refer to this standard for implementation.
Development Information
Referenced Standards
GB/T 8511-2005 Vibratory roller
GB/T 13328-2005 General requirement for rollers
GB 20891-2007
JB/T 8548
GB/T 3766-2001 Hydraulic fluid power—General rules relating to systems
GB/T 3766-2015 Hydraulic fluid power—General rules and safety requirements for systems and their components
GB/T 7920.5-2003 Earth-moving-machinery-Rollers and landfill compactors-Terminology and commercial specification
GB/T 7935-2005 Hydraulic fluid power—General requirements for hydraulic components
GB/T 13306-1991 Plates
GB/T 13306-2011 Plates
GB/T 16937-2010 Earth-moving machinery—Operator's field of view—Test method and performance criteria
GB/T 16937-2020 Earth-moving machinery—Operator’s field of view—Test method and performance criteria
GB/T 16937.1-1997 Earth-moving machinery—Operator's field of view—Criteria
GB/T 16937.2-1997 Earth-moving machinery—Operator's field of view—Evaluation method
GB/T 17922-1999 Earth-moving machinery—Roll-over protective structures—Laboratory tests and performance requirements
GB/T 17922-2014 Earth-moving machinery—Roll-over protective structures—Laboratory tests and performance requirements
GB/T 21935-2008 Earth-moving machinery—Zones of comfort and reach for controls
JB/T 4198.1-2020 Engineering machinery - Diesel engines - Part 1: Technical specification
JB/T 4198.1-2001 Engineering machinery diesel engine technical specification
JB/T 8816-2015 Excavator Driving Axle Technical Specification
JB/T 10902-2020 JBT 10902-2020 Construction machinery driver compartment
JB/T 8816-1998 Engineering machinery Drive axle technical specification
JB/T 7160-1993 Excavator driver's field of view test method
JB/T 10902-2008 Construction machinery-Cabs
Related Standards
GB/T 19054-2003
Replaced
GB/T 19054-2003 General technical conditions for fuel oil cremator
GB/T 19229.1-2008
Active
GB/T 19229.1-2008 Coal-fired flue gas desulphurization equipment—Part 1:Coal-fired flue gas wet desulphurization equipment
GB/T 21508-2008
Replaced
GB/T 21508-2008 Performance test method for coal-fired flue gas desulphurization equipment
GB/T 21509-2008
Active
GB/T 21509-2008 Denitration equipment of coal-fired flue gas
GB/T 16845-2008
Replaced