GB/T 4169.3-2006 Active National standards

GB/T 4169.3-2006 Components of injection moulds for plastics—Part 3:Headed guide bush

GB/T 4169.3-2006 Components of injection moulds for plastics—Part 3:Headed guide bush

Publish Date: 2006-12-08 Implement Date: 2007-04-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 4169.3-2006

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Mold

ICS Name: Molding equipment and casting equipment

Publish Date: 2006-12-08

Implement Date: 2007-04-01

Pages: 5 pages

Scope

This section specifies the dimensions and tolerances of guide sleeves with heads used in plastic injection molds. This section applies to guide sleeves with heads used in plastic injection molds. This section also provides material guidelines and hardness requirements, and stipulates the marking of guide sleeves with heads.

Development Information

Word Count: 8 Thousand words Pages: 5 pages

Same series standard

GB/T 4169.1-2006 Components of injection moulds for plastics—Part 1:Ejector pin GB/T 4169.2-2006 Components of injection moulds for plastics—Part 2:Straight guide bush GB/T 4169.4-2006 Components of injection moulds for plastics—Part 4:Headed guide pillar GB/T 4169.5-2006 Components of injection moulds for plastics—Part 5:Shouldered guide pillar GB/T 4169.6-2006 Components of injection moulds for plastics—Part 6:Spacer block GB/T 4169.7-2006 Components of injection moulds for plastics—Part 7:Ejector plate GB/T 4169.8-2006 Components of injection moulds for plastics—Part 8:Mould plate GB/T 4169.9-2006 Components of injection moulds for plastics—Part 9:Stop pin GB/T 4169.10-2006 Components of injection moulds for plastics—Part 10:Support pillar GB/T 4169.11-2006 Components of injection moulds for plastics—Part 11:Round locating element GB/T 4169.12-2006 Components of injection moulds for plastics—Part 12:Ejector guide bush GB/T 4169.13-2006 Components of injection moulds for plastics—Part 13:Return pin GB/T 4169.14-2006 Components of injection moulds for plastics—Part 14:Ejector guide pillar GB/T 4169.15-2006 Components of injection moulds for plastics—Part 15:Flat ejector pin GB/T 4169.16-2006 Components of injection moulds for plastics—Part 16:Shouldered ejector pin GB/T 4169.17-2006 Components of injection moulds for plastics—Part 17:Ejector sleeve GB/T 4169.18-2006 Components of injection moulds for plastics—Part 18:Locating ring GB/T 4169.19-2006 Components of injection moulds for plastics—Part 19:Sprue bush GB/T 4169.20-2006 Components of injection moulds for plastics—Part 20:Limit pin GB/T 4169.21-2006 Components of injection moulds for plastics—Part 21:Rectangular locating element GB/T 4169.22-2006 Components of injection moulds for plastics—Part 22:Round mould opening delayer GB/T 4169.23-2006 Components of injection moulds for plastics—Part 23:Rectangular mould opening delayer

Replace the following standards

GB/T 4169.3-1984

Referenced Standards

GB/T 1184-1996 Geometrical tolerancing—Geometrical tolerance for features without individual tolerance indications GB/T 4170-2006 Specification of components of injection moulds for plastics

Related Standards

GB/T 4170-1984 Replaced

GB/T 4170-1984 Components of injection mould for plastics—Specification

Publish Date: 1984-02-27

GB/T 8845-1988 Replaced

GB/T 8845-1988 Terminology for dies

Publish Date: 1988-02-29

GB/T 9453-1988 Replaced

GB/T 9453-1988 Terminology of forging dies and elements

Publish Date: 1988-06-24

GB/T 2851.1-1990 Replaced

GB/T 2851.1-1990 Sliding guide die sets for press tools—Diagonal pillar sets

Publish Date: 1990-07-23

GB/T 2851.3-1990 Replaced

GB/T 2851.3-1990 Sliding guide die sets for press tools—Back pillar sets

Publish Date: 1990-07-23

GB/T 2851.4-1990 Replaced

GB/T 2851.4-1990 Sliding guide die sets for press tools—Back pillar sets (narrow)

Publish Date: 1990-07-23