GB 3198-1996
Abolished
YS/T 429.2-2012
Active
Industry standards-Non-ferrous metals
YS/T 429.2-2012 Aluminum curtain wall panel—Part 2:Aluminum panel with organic polymer coating
YS/T 429.2-2012 Aluminum curtain wall panel—Part 2:Aluminum panel with organic polymer coating
Basic Information
Standard Code:
YS/T 429.2-2012
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Light metals and their alloys
ICS Name:
Aluminum products
Publish Date:
2012-11-07
Implement Date:
2013-03-01
Pages:
11 pages
Scope
This part specifies the requirements, test methods, inspection rules, marking, packaging, transportation, storage, and quality certificates for organic polymer spray-coated aluminum composite panels used in curtain walls, as well as the content of purchase orders (or contracts).
This part applies to single-layer aluminum and aluminum alloy forming panels (hereinafter referred to as aluminum composite panels) used in curtain walls, which are coated with fluorocarbon paint (polyvinylidene fluoride) or powder (thermosetting organic polymers) on the surface.
Development Information
Replace the following standards
Referenced Standards
GB/T 8005.3-2008 Aluminium and aluminium alloys—Terms and definitions—Part 3:Surface treatment
GB/T 8013.3-2007 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 3:Organic polymer coatings
GB/T 3199-1996 Wrought aluminium and aluminium alloy products—Packing, marking, transporting and storing
GB/T 3199-2007 Wrought aluminium and aluminium alloy products—Packing, marking, transporting and storing
GB/T 3880.3-2006 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 3:Tolerances on forms and dimensions
GB/T 3880.3-2012 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 3:Tolerances on forms and dimensions
GB/T 3880.3-2024 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 3:Tolerances on forms and dimensions
GB 5237.4-2004 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles
GB/T 5237.4-2008 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles
GB/T 5237.4-2017 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles
GB 5237.5-2004 Wrought aluminium alloy extruded profiles for architecture—Part 5:PVDF coating profiles
GB/T 5237.5-2008 Wrought aluminium alloy extruded profiles for architecture—Part 5:PVDF coating profiles
GB/T 5237.5-2017 Wrought aluminium alloy extruded profiles for architecture— Part 5:Paint coating profiles
GB/T 9761-2008 Paints and varnishes—Visual comparison of the colour of paints
GB/T 16865-1997 Test pieces for tensile test for wrought aluminum and magnesium alloy products
GB/T 16865-2013 Test pieces and method for tensile test for wrought aluminium and magnesium alloys products
GB/T 16865-2023 Test pieces and methods for tensile test for wrought aluminium,magnesium and their alloy products
YS/T 429.1-2000
YS/T 429.1-2014 Aluminum curtain wall panel—Part 1:Mill finish sheet and strip
YS/T 429.1-2023 YS/T 429.1-2023 Aluminum Wall Panel Part 1: Substrate。
Adopt standards
AAMA 2604:2005
AAMA 2605:2005
Related Standards
GB/T 16474-1996
Replaced
GB/T 16474-1996 Wrought aluminium and aluminium alloy—Designation system
GB/T 16475-1996
Replaced
GB/T 16475-1996 Temper designation system for wrought aluminium and aluminium alloy
GB/T 3190-1996
Replaced
GB/T 3190-1996 Wrought aluminium and aluminium alloys—Chemical composition limits
GB/T 16501-1996
Abolished
GB/T 16501-1996 Hot rolled strip of aluminium and aluminium alloy
GB/T 3196-2001
Replaced