T/JALNCP 4101-2023 Jinggangshan Eucommia
T/JALNCP 4101-2023 Jinggangshan Eucommia
Basic Information
Scope
Main technical content: 4.1 The environmental conditions at the production site shall comply with the provisions of NY/T 391; organic products shall comply with the provisions of GB/T 19630. 4.2 Input materials shall comply with the provisions of NY/T 393 and NY/T 394; organic products shall comply with the provisions of GB/T 19630. 4.3 Raw materials shall be harvested from May to June, stripped of the outer bark, and subjected to "sweating" until the inner bark turns purple-brown. They shall then be dried, free from insect infestation and mold. 4.4 Sensory requirements: The product shall be in the form of plaques or sheets, with uneven sizes and a thickness of 3mm to 7mm. The outer surface shall be light brown or grayish brown, with obvious wrinkles or longitudinal grooves. Some may have thinner bark; if the bark is not stripped, obvious bark pores can be observed. The inner surface shall be dark purple and smooth. The product shall be brittle and easy to break, with cross-sections connected by fine, silvery-white, elastic Duzhong gum filaments. It shall have a faint odor and a slightly bitter taste. 4.5 Physical and chemical indicators shall comply with the requirements of Table 1. 4.6 Safety indicators: 4.6.1 Heavy metals and harmful elements shall comply with the consistency limit values for heavy metals and harmful elements specified in the Guidelines for the Consistency of Heavy Metals and Harmful Elements in Pharmacopoeia of the People's Republic of China (2020 Edition), Part IV. Organic products shall comply with the provisions of GB/T 19630. 4.6.2 Pesticide residues shall comply with the requirements of the General Principles of Pharmacopoeia of the People's Republic of China (2020 Edition), Part II. Organic products shall comply with the provisions of GB/T 19630. 4.7 Net content shall comply with the requirements of the Measurement Supervision and Management Methods for Quantitative Packaged Commodities, and the inspection methods shall b