YY 0604-2016
Active
Industry standards-Medicine
YY 0604-2016 Cardiopulmonary bypass systems—Blood-gas exchangers(oxygenators)
YY 0604-2016 Cardiopulmonary bypass systems—Blood-gas exchangers(oxygenators)
Basic Information
Standard Code:
YY 0604-2016
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Extracorporeal circulation, artificial organs, and prosthetic devices
ICS Name:
Surgical implants, prostheses, and orthoses
Publish Date:
2016-03-23
Implement Date:
2018-01-01
Pages:
16 pages
Scope
This standard specifies the requirements for blood gas exchangers (oxygenators) used in sterile, single-use cardiopulmonary bypass systems (hereinafter referred to as oxygenators). These devices are used to supply oxygen to human blood and remove carbon dioxide from the blood (extracorporeal circulation devices that assist or replace the respiratory function of the lungs).
This standard also applies to heat exchangers that are an integral part of oxygenators.
This standard does not apply to:
——implantable oxygenators;
——liquid oxygenators;
——extracorporeal circulation pipes;
——separate heat exchangers;
——separate accessories.
Development Information
Replace the following standards
Referenced Standards
GB/T 14233.1-2008 Test methods for infusion,transfusion,injection equipments for medical use—Part 1:Chemical analysis methods
GB/T 14233.2-2005 Test methods for infusion,transfusion,injection equipment for medical use—Part 2:Biological test methods
GB 19335-2003 Blood flow products for single use—General specification
GB/T 19633-2005 Packaging for terminally sterilized medical devices
YY/T 0466.1-2009 Medical devices—Symbols to be used with medical device labels, labelling and information to be supplied—Part 1:General requirements
YY/T 0681.1-2009 Test methods for sterile medical device package—Part 1:Test guide for accelerated aging
GB/T 16886.1-2001 Biological evaluation of medical devices—Part 1:Evaluation and testing
GB/T 16886.1-2011 Biological evaluation of medical devices—Part 1:Evaluation and testing within a risk management process
GB/T 16886.1-2022 Biological evaluation of medical devices—Part 1:Evaluation and testing within a risk management process
GB 18279-2000 Medical devices—Validation and routine control of ethylene oxide sterilization
GB 18279-2023 Sterilization of health-care products—Ethylene oxide—Requirements for the development,validation and routine control of a sterilization process for medical devices
GB 18279.1-2015 Sterilization of health care products—Ethylene oxide—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices
GB/T 18279.2-2015 Sterilization of health care products—Part 2:Guidance on the application of GB 18279.1
GB 18280-2000 Sterilization of health care products—Requirement for validation and routine control—Radiation sterilization
GB 18280.1-2015 Sterilization of health care products—Radiation—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices
GB 18280.2-2015 Sterilization of health care products—Radiation—Part 2:Establishing the sterilization dose
GB/T 18280.3-2015 Sterilization of health care products—Radiation—Part 3:Guidance on dosimetric aspects
GB/T 18280.2-2025 Sterilization of health care products—Radiation—Part 2:Establishing the sterilization dose
GB 18280.1-2025 Sterilization of health care products—Radiation—Part 1:Requirements for the development,validation and routine control of a sterilization process for medical devices
GB/T 18280.3-2025 Sterilization of health care products—Radiation—Part 3:Guidance on dosimetric aspects of development,validation and routine control
Adopt standards
ISO 7199:2009
Related Standards
GB 12264-1990
Replaced
GB 12279-1990
Replaced
GB 12279-1990 Cardiac valve prostheses general technical specification
GB 12417-1990
Replaced
GB 12417-1990 The general technological conditions of surgical metal implant
GB/T 13461-1992
Replaced
GB/T 13461-1992 Synthetic resin blow knee prostheses
GB/T 14191-1993
Replaced
GB/T 14191-1993 Terminology for prosthetics and orthotics
GB 14722-1993
Replaced