GB/T 13288.4-2013 Active National standards

GB/T 13288.4-2013 Preparation of steel substrates before application of paints and related products—Surface roughness characteristics of blast-cleaned substrates—Part 4:Method for the calibration of ISO surface profile comparator and for the determination of surface profile—Stylus instrument procedure

Publish Date: 2013-07-19 Implement Date: 2013-12-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 13288.4-2013

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Material protection

ICS Name: Pre-treatment of the surface

Publish Date: 2013-07-19

Implement Date: 2013-12-01

Pages: 10 pages

Scope

This part of GB/T 13288 specifies the calibration of surface roughness comparison samples in GB/T 13288-1 and the stylus method for measuring surface roughness.
This part of GB/T 13288 is also applicable to the measurement of surface roughness of flat steel or replicas after jet cleaning, with an average peak-valley difference in the range of Ry5=20 μm to 200 μm. The measurement can be carried out in a representative area of the jet-cleaned surface. If it is not possible to measure directly on the surface, the measurement can be carried out on a replica of the surface (see Appendix C).
Note: If necessary, it can also be used to evaluate the surface roughness of other substrates cleaned by abrasive jetting.
Another optional method is described in ISO 8503-3.

Development Information

Word Count: 18 Thousand words Pages: 10 pages

Referenced Standards

ISO 3274 ISO 4287-1 ISO 4618 ISO 5436 ISO 8503-1 ISO 8503-2 ISO 8503-3 ISO 8504-2 ISO/TC 57

Adopt standards

ISO 8503-4:1988

Related Standards

GB/T 18570.2-2001 Replaced

GB/T 18570.2-2001 Preparation of steel substrates before application of paints and related products—Tests for the assessment of surface cleanliness—Laboratory determination of chloride on cleaned surfaces

Publish Date: 2001-12-13

GB/T 18570.4-2001 Active

GB/T 18570.4-2001 Preparation of steel substrates before application of paints and related products—Tests for the assessment of surface cleanliness—Guidance on the estimation of the probability of condensation prior to paint application

Publish Date: 2001-12-13

GB/T 6807-2001 Active

GB/T 6807-2001 Specifications for phosphating treatment of iron and steel parts before painting

Publish Date: 2001-12-17

GB/T 17850.1-2002 Replaced

GB/T 17850.1-2002 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—General introduction and classification

Publish Date: 2002-09-13

GB/T 18838.1-2002 Active

GB/T 18838.1-2002 Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—General introduction and classification

Publish Date: 2002-09-13

GB/T 18839.1-2002 Active

GB/T 18839.1-2002 Preparation of steel substrates before application of paints and related products—Surface preparation methods—General principles

Publish Date: 2002-09-13