GB/T 3554-1983
Replaced
GB/T 8029-2010
Active
National standards
GB/T 8029-2010 Calibration fluid for diesel injection pump
GB/T 8029-2010 Calibration fluid for diesel injection pump
Basic Information
Standard Code:
GB/T 8029-2010
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Other petroleum products
ICS Name:
Paraffin, asphalt materials, and other petroleum products
Publish Date:
2010-09-02
Implement Date:
2010-12-01
Pages:
5 pages
Scope
This standard specifies the technical requirements and test methods, inspection rules, and marking, packaging, transportation, and storage for the fuel injection pump adjustment oil made from refined mineral oil distillates and various additives such as rust inhibitors and antioxidants.
The products covered by this standard are suitable for the debugging, calibration, and standardization of diesel engine fuel injection pumps, as well as for the cleaning of fuel injection pumps before debugging and short-term rust prevention after debugging.
Development Information
Replace the following standards
Referenced Standards
SH/T 0238
GB/T 261-1983 Petroleum products—Determination of flash point—Closed cup method
GB/T 261-2008 Determination of flash point—Pensky-Martens closed cup method
GB/T 261-2021 Determination of flash point—Pensky-Martens closed cup method
GB/T 265-1988 Petroleum products—Determination of kinematic viscosity and calculation of dynamic viscosity
GB/T 511-1988 Petroleum products and additives—Determination of mechanical impurities—Gravimetric method
GB/T 511-2010 Petroleum,petroleum products and additives—Method for determination of mechanical admixtures
GB/T 1884-2000 Crude petroleum and liquid petroleum products—Laboratory determination of density—Hydrometer method
GB/T 1885-1998 Petroleum measurement tables
GB/T 2361-1992 Rust preventing oils and greases—Test method of wet heat
GB/T 4756-1998 Petroleum liquids—Manual sampling
GB/T 4756-2015 Method for manual sampling of petroleum liquids
GB/T 5096-1985 Petroleum products—Corrosiveness to copper—Copper strip test
GB/T 5096-2017 Test method for corrosiveness to copper from petroleum products by copper strip test
GB/T 6536-1997 Petroleum products—Determination of distillation
GB/T 6536-2010 Standard test method for distillation of petroleum products at atmospheric pressure
GB/T 6540-1986 Petroleum products—Determination of colour
GB/T 11143-1989 Inhibited mineral oil—Test method of rust preventing characteristics in the presence of water
GB/T 11143-2008 Standard test method for rust-preventing characteristics of inhibited mineral oil in the presence of water
GB/T 12579-2002 Determination of foaming characteristics of lubricating oils
SH 0164-1992 Rules for packaging, storage, transportation, and acceptance of petroleum products
SH/T 0185-1992 The method for determining oxidative stability of straight-run lubricating oil
SH/T 0725-2002 SH/T 0725-2002 Petroleum-based insulating oil carbon composition calculation method
SH/T 0179-1992 Determination of Turbidity and Crystallization Point of Light Petroleum Products
GB/T 11143-2025 Test method for rust-preventing characteristics of inhibited mineral oil in the presence of water
GB/T 6540-2025 Determination for colour of petroleum products
Adopt standards
ISO 4113:1988
Related Standards
GB/T 7363-1987
Replaced
GB/T 7363-1987 Paraffin wax—Determination of polynuclear aromatics
GB/T 7364-1987
Replaced
GB/T 7364-1987 Paraffin wax—Determination of carbonizable substances
GB/T 8024-1987
Abolished
GB/T 8024-1987 Petroleum waxes and petrolatums—Determination of trace nitrogen—Microcoulometric method
GB/T 8025-1987
Active
GB/T 8025-1987 Petroleum waxes and petrolatums—Determination of trace sulfur—Microcoulometric method
GB/T 8026-1987
Replaced