T/JSAS 052-2023 Cosmetic high-white material glass bottle

Scope

Scope: This document specifies the terms and definitions, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of high-white glass bottles for cosmetic products (hereinafter referred to as "bottles"). This document applies to bottles used for filling liquids and creams. Main technical content: - Non-main view: The bottom, back, side, and inner surfaces of the bottle, excluding the main view. - Product classification and structure: 4.1 Product classification: 4.1.1 Divided into round bottles and non-round bottles according to bottle type. 4.1.2 Divided into screw-top bottles and clamp-top bottles according to bottle mouth shape. 4.2 Product structure: See Figure 1 for schematic diagrams of screw-top and clamp-top bottles. T – Thread outer diameter; E – Bottle mouth outer diameter; d – Bottle mouth inner diameter; H – Bottle body height. Figure 1: Product structure schematic diagram. 5. Technical requirements: 5.1 Appearance quality: 5.1.1 Surface and inner wall: 5.1.1.1 The surface shall not have rust stains, spots, or hard-to-remove contaminants. There shall be no obvious roughness, scratches, or oil or water stains. 5.1.1.2 The inner wall shall not have adhesive residue, glass filaments, burrs, or broken glass. 5.1.2 Bottle mouth: No cracks, damage, unevenness, or burrs; no obvious misalignment of the neck, and no defects affecting filling, sealing, or compatibility. 5.1.3 Thread: Smooth and intact, without deformation or roughness. 5.1.4 Mold line: No sharp or prickly edges; the protrusion shall not exceed 0.4mm.

Development Information

Related Standards