T/SZMES 6-2023 Active Group standards

T/SZMES 6-2023 Forging and casting integrated forming machine

Publish Date: 2023-05-19 Implement Date: 2023-05-26 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/SZMES 6-2023

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: -

ICS Name: Molding equipment and casting equipment

Publish Date: 2023-05-19

Implement Date: 2023-05-26

Scope

Scope: This document specifies the terms and definitions, types and basic parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage of forging and casting integration machines (hereinafter referred to as "machines"). This document applies to the design, manufacture, and use of forging and casting integration machines. Main technical content: - The machines shall comply with the requirements of this document and be manufactured in accordance with the drawings and technical documents approved through the prescribed procedures. - The hydraulic system and hydraulic components shall comply with the provisions of GB/T 3766 and GB/T7935. - The electrical system shall comply with the provisions of GB/T 5226.1. - The pneumatic system shall comply with the provisions of GB/T7932. - The machines shall have nameplates and signs indicating the requirements for the operation, lubrication, and safety of the hydraulic and pneumatic systems. The content and markings of the nameplates and signs shall be correct, and the signs shall comply with the provisions of GB/T 13306. - It is allowed to inlay or cast clear factory names and trademarks. - The machines shall have reliable lubrication devices and shall have detection functions and audible/visual alarm prompts. - The machines shall have sensor interfaces for testing process parameters. - The hydraulic system of the machines shall be unobstructed and leak-free. The temperature of the working fluid shall not exceed 55°C during continuous operation. When the temperature exceeds the above limit, an automatic alarm shall be triggered. - The working fluid medium shall comply with the provisions of the technical documents, and the solid particle pollution level of the hydraulic system of the machines shall comply with the grade code specified in GB/T 14039-2002 -/18/15. - After assembly, the control valve rods of each control mechanism shall be flexible, r