JG/T 205-2007
Abolished
GB/T 26541-2011
Active
National standards
GB/T 26541-2011 Autoclaved fly ash perforated brick
GB/T 26541-2011 Autoclaved fly ash perforated brick
Basic Information
Standard Code:
GB/T 26541-2011
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Wall materials
ICS Name:
Wall, partition wall, and curtain wall
Publish Date:
2011-06-16
Implement Date:
2012-04-01
Pages:
13 pages
Scope
This standard specifies the terms and definitions, specifications, grades and markings, general provisions, technical requirements, test methods, inspection rules, product quality certificates, and storage and transportation of autoclaved fly ash porous bricks.
This standard applies to autoclaved fly ash porous bricks (hereinafter referred to as porous bricks) used in the load-bearing structures of industrial and civil buildings.
Development Information
Referenced Standards
GB 175-1999 Portland cement and ordinary Portland cement
GB 175-2007 Common portland cement
GB 175-2023 Common portland cement
GB/T 2542-2003 Test methods for wall bricks
GB/T 2542-2012 Test methods for wall bricks
GB/T 4111-1997 Test methods for the small concrete hollow block
GB/T 4111-2013 Test methods for the concrete block and brick
GB 6566-2001 Limit of radionuclides in building materials
GB 6566-2010 Limits of radionuclides in building materials
GB/T 18968-2003 Terms of wall materials
GB/T 18968-2019 Terms of wall materials
JC/T 409-2016 Fly ash for use in cement-based building products
JC/T 621-2021 Portland cement building products use raw lime
JC/T 621-2009 Raw lime for use in silicate building products
JC 409-1991 Fly ash for architectural products
JC/T 621-1996 Lime for use in silicate building products
Related Standards
GB/T 15227-2007
Replaced
GB/T 15227-2007 Test method of air permeability, water tightness, wind load resistance performance for curtain walls
GB/T 21086-2007
Active
GB/T 21086-2007 Curtain wall for building
GB/T 22631-2008
Active
GB/T 22631-2008 Vertical building elements—Impact resistance test—Impact bodies and general test procedures
GB/T 23449-2009
Active
GB/T 23449-2009 Hollow concrete panel contained solid wastes for partition wall
GB/T 23450-2009
Replaced