GB 7228-1987
Abolished
GB/T 40434-2021
Active
National standards
GB/T 40434-2021 Rectification equipment for charging industrial batteries
GB/T 40434-2021 Rectification equipment for charging industrial batteries
Basic Information
Standard Code:
GB/T 40434-2021
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Power semiconductor devices and components
ICS Name:
Rectifiers, converters, and regulated power supplies
Publish Date:
2021-08-20
Implement Date:
2022-03-01
Pages:
33 pages
Scope
This standard specifies the terms and definitions, product models and basic parameters, technical requirements, testing, marking, packaging, transportation, and storage of industrial battery charging and rectifying equipment (hereinafter referred to as charging and rectifying equipment). This standard applies to charging and rectifying equipment used in industrial settings with a DC output voltage not exceeding 1,000 V and a DC power of not less than 10 kW per power unit, as well as charging and rectifying equipment composed of one or multiple power units. It also applies to charging and rectifying equipment installed as accessories in other equipment. Note: Charging and rectifying equipment is used for charging or discharging rechargeable batteries, providing battery charging or discharging for battery formation and similar equipment, and adopts plug connections, cable connections, or permanent connections. This standard does not apply to battery chargers for fire alarm and fire-fighting systems, household battery chargers, automotive starting battery chargers, battery chargers for driving centrifugal ignition pumps, or equipment using battery chargers for other system applications. The rapid charging in this standard also does not apply to charging lead-acid flooded batteries.
Development Information
Referenced Standards
GB/T 2423.5-2019 Environmental testing—Part 2:Test methods—Test Ea and guidance:Shock
GB/T 3859.1-2013 Semiconductor converters—General requirements and line commutated converters—Part 1-1:Specification of basic requirements
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control, and laboratory use—Part 1:General requirements
GB/T 13422-2013 Semiconductor converters—Electrical test methods
GB 17625.1-2012 Electromagnetic compatibility—Limits—Limits for harmonic current emissions(equipment input current ≤16 A per phase)
GB/T 17625.8-2015 Electromagnetic compatibility—Limits—Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤75 A per phase
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.11-2008 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips,short interruptions and voltage variations immunity tests
GB/T 17626.12-2013 Electromagnetic compatibility—Testing and measurement techniques—Ring wave immunity test
GB/T 2423.7-1995 Environmental testing for electric and electronic products Part 2:Test Ec and quidance:Drop and topple (Primarily for equipment-type specimens)
GB/T 2423.7-2018 Environmental testing—Part 2:Test methods—Test Ec:Rough handling shocks,primarily for equipment-type specimens
GB/T 4365-2003 Electrotechnical terminology—Electromagnetic compatibility
GB 4824-2004 Industrial, scientific and medical(ISM) radio-frequency equipment—Electromagnetic disturbance characteristics—Limits and methods of measurement
GB 4824-2013 Industrial,scientific and medical(ISM) radio-frequency equipment—Disturbance characteristics—Limits and methods of measurement
GB 4824-2019 Industrial,scientific and medical equipment—Radio-frequency disturbance characteristics—Limits and methods of measurement
GB/T 13384-1992 General specifications for packagings of mechanical and electrical products
GB/T 13384-2008 General specifications for packing of mechanical and electrical product
GB/T 14549-1993 Quality of electric energy supply—Harmonics in public supply network
GB/T 17626.2-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test
DL/T 857-2004 Specification of rectification inversion equipment for battery of power plant and substation
GB/T 4365-2024 Electrotechnical terminology—Electromagnetic compatibility
GB 4824-2025 Industrial, scientific and medical equipment—Radio-frequency disturbance characteristics—Limits and methods of measurement
Related Standards
GB/T 13422-1992
Replaced
GB/T 13422-1992 Power semiconductor converters Electrical test methods
GB/T 3859.1-1993
Replaced
GB/T 3859.1-1993 Semiconductor convertors—Specification of basic requirements
GB/T 3859.2-1993
Replaced
GB/T 3859.2-1993 Semiconductor convertors—Application guide
GB/T 3859.3-1993
Replaced
GB/T 3859.3-1993 Semiconductor convertors—Transformers and reactors
GB/T 16859-1997
Active