GB/T 16400-1996
Replaced
JG/T 24-2018
Active
Industry standards-The construction industry
JG/T 24-2018 Sand textured building coating based on synthetic resin emulsion
JG/T 24-2018 Sand textured building coating based on synthetic resin emulsion
Basic Information
Standard Code:
JG/T 24-2018
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Building materials products
ICS Name:
Other building materials
Publish Date:
2018-06-12
Implement Date:
2018-12-01
Pages:
14 pages
Scope
This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules, marking, packaging, and storage of synthetic resin emulsion sand-wall building coatings. This standard applies to sand-wall building coatings mainly based on synthetic resin emulsions, which are used for decoration and protection on the surfaces of buildings and structures.
Development Information
Replace the following standards
Referenced Standards
GB/T 1728-1979
GB/T 1733-1993 Determination of resistance to water of films
GB/T 1748
GB/T 1865-2009 Paints and varnishes—Artificial weathering and exposure to artificial radiation—Exposure to filtered xenon-arc radiation
GB/T 9268-2008 Determination of freeze-thaw resistance of latex and emulsion paints
GB/T 9271-2008 Paints and varnishes—Standard panels for testing
GB/T 9780-2013 Test method for dirt pickup resistance and stain remvoal of film of architectural coatings and paint
JG/T 157-2009 Putty for exterior wall
GB/T 1766-1995 Paint and varnish—Rating schemes of degradation of coats
GB/T 1766-2008 Paints and varnishes—Rating schemes of degradation of coats
GB 3186-1982 Sampling paint products
GB/T 3186-2006 Paints, varnishes and raw materials for paints and varnishes—Sampling
GB/T 5950-1996 Method for measurement of whiteness of building materials and non-metal mineral products
GB/T 5950-2008 Method for measurement of whiteness of building materials and non-metal mineral products
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 9265-1988 Determination of alkali resistance of film of architectural paints and coatings
GB/T 9265-2009 Determination for alkali resistance of film of architectural paints and coatings
GB/T 9750-1998 Marks for package of coating products
GB 11614-1999 Float glass
GB 11614-2009 Flat glass
GB 11614-2022 Flat glass
GB/T 13491-1992 General rule for packing of coatings
GB/T 30191-2013 Photocatalysis self-cleaning coatings for exterior wall
JG/T 25-2017 Test method for temperature change resistance of architectural coatings
JG/T 25-1999 Determination for freeze-thaw resistance of film of building coatings
JC/T 412.1-2006 Fiber cement flat sheets Part 1:Non-Asbestos Fiber cement flat sheets
GB/T 9750-2025 General rules for packaging,labelling,transport and storage of coating material and pigment products
GB/T 30191-2025 Photocatalysis self-cleaning coatings for exterior wall
Related Standards
GB/T 16401-1996
Replaced
GB/T 16401-1996 Test method for water absorption of mineral wool products
GB/T 17748-1999
Replaced
GB/T 17748-1999 Aluminium-plastic composite panel
GB/T 8627-1999
Replaced
GB/T 8627-1999 Test method for density of smoke from the burning or decomposition of building materials
JG/T 167-2004
Replaced
JG/T 167-2004 Carbon fiber laminate for strengthening and restoring structures
JG/T 206-2007
Replaced