GB/T 5013.5-2008 Active National standards

GB/T 5013.5-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 5:Lift cables

GB/T 5013.5-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 5:Lift cables

Publish Date: 2008-01-22 Implement Date: 2008-09-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 5013.5-2008

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Cables and their accessories

ICS Name: Cable

Publish Date: 2008-01-22

Implement Date: 2008-09-01

Pages: 6 pages

Scope

This part of GB/T 5013 provides the technical requirements for rubber-insulated elevator cables with a rated voltage of 300/500 V. Each type of cable shall comply with the requirements specified in GB/T 5013.1 and the special requirements of this part.

Development Information

Word Count: 9 Thousand words Pages: 6 pages

Same series standard

GB/T 5013.1-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 1:General requirements GB/T 5013.2-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 2:Test methods GB/T 5013.3-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 3:Heat resistant silicone insulated cables GB/T 5013.4-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 4:Cords and flexible cables GB/T 5013.6-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 6:Arc welding electrode cables GB/T 5013.7-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 7:Heat resistant ethylene-vinyl acetate rubber insulated cables

Replace the following standards

GB 5013.5-1997 Rubber insulated cables of rated voltages up to and including 450/750V—Part 5:Lift cables

Referenced Standards

GB/T 2951.1-1997 Common test methods for insulating and sheathing materials of electric cables—Part 1:Methods for general application—Section one:Measurement of thickness and overall dimensions—Tests for determining the mechanical properties GB/T 2951.2-1997 Common test methods for insulating and sheathing materials of electric cables—Part 1:Methods for general application—Section two:Thermal ageing methods GB/T 2951.5-1997 Common test methods for insulating and sheathing materials of electric cables—Part 2:Methods specific to elastomeric compounds— Section one:Ozone resistance test—Hot set test—Mineral oil immersion test GB/T 5013.1-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 1:General requirements GB/T 5013.2-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 2:Test methods GB/T 3956-1997 Conductors of insulated cables GB/T 3956-2008 Conductors of insulated cables

Adopt standards

IEC 60245-5:1994

Related Standards

GB/T 4011-1983 Replaced

GB/T 4011-1983 1.2/4.4mm composite coaxial cable for telecommunication use

Publish Date: 1983-12-15

GB/T 4012-1983 Replaced

GB/T 4012-1983 2.6/9.5mm composite coaxial cable for telecommunication use

Publish Date: 1983-12-15

GB/T 5441.10-1985 Replaced

GB/T 5441.10-1985 Test methods for communication cable—Measurement of actual length of coaxial pair—Sine wave method

Publish Date: 1985-09-29

GB/T 5441.1-1985 Replaced

GB/T 5441.1-1985 Test methods for communication cable General

Publish Date: 1985-09-29

GB/T 5441.2-1985 Replaced

GB/T 5441.2-1985 Test methods for communication cable Capacitance test Bridge method

Publish Date: 1985-09-29

GB/T 5441.3-1985 Replaced

GB/T 5441.3-1985 Test methods for communication cable Capacitance unbalance test

Publish Date: 1985-09-29