GB/T 3750.3-1983
Replaced
GB/T 3103.1-2002
Active
National standards
GB/T 3103.1-2002 Tolerances for fasteners—Bolts, screws, studs and nuts
GB/T 3103.1-2002 Tolerances for fasteners—Bolts, screws, studs and nuts
Basic Information
Standard Code:
GB/T 3103.1-2002
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Fasteners
ICS Name:
Bolts, screws, and studs
Publish Date:
2002-12-05
Implement Date:
2003-06-01
Pages:
59 pages
Development Information
Replace the following standards
GB 3103.1-1982
Referenced Standards
GB/T 70.3-2000 Hexagon socket countersunk head screws
GB/T 944.1-1985
GB/T 1182-1996 Geometrical tolerancing—Generalities, definitions, symbols, indications on drawings
GB/T 1800.2-1998 Limits and fits—Bases—Part 2:Basic rules of tolerances, deviations and fits
GB/T 1800.4-1999 Limits and fits Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 2516-1981
GB/T 3105-2002 General purpose bolts and screws—Radii under the head
GB/T 4249-1996 Tolerancing principle
GB/T 5267.1-2002 Fasteners—Electroplated coatings
GB/T 5276-1985
GB/T 5279-1985
GB/T 5280-2002 Tapping screws thread
GB/T 5285-1985
GB/T 6170-2000 Hexagon nuts,style 1
GB/T 6188-2000 Hexalobular internal driving feature for bolts and screws
GB/T 16671-1996 Geometrical tolerancing—Maximum material requirement, least material requirement and reciprocity requirement
GB/T 16824.1-1997
GB/T 16824.2-1997
Adopt standards
ISO 4759-1:2000
Related Standards
GB/T 5277-1985
Active
GB/T 5277-1985 Fasteners—Clearance holes for bolts and screws
GB/T 6560-1986
Replaced
GB/T 6560-1986 Cross recessed pan head thread forming screws
GB/T 6561-1986
Replaced
GB/T 6561-1986 Cross recessed countersunk head thread forming screws
GB/T 6562-1986
Replaced
GB/T 6562-1986 Cross recessed raised countersunk head thread forming screws
GB/T 6563-1986
Replaced