FZ/T 92075-2008 Active Industry standards-Textiles

FZ/T 92075-2008 Covering of winding roller for loom

Publish Date: 2008-03-12 Implement Date: 2008-09-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: FZ/T 92075-2008

Standard Type: Industry standards

Standard Status: Active

is_force_gb: no

CCS Name: Weaving Department Machinery and Instruments

ICS Name: Looms and weaving machines

Publish Date: 2008-03-12

Implement Date: 2008-09-01

Pages: 7 pages

Scope

This standard specifies the classification and marking, requirements, test methods, inspection rules, and packaging, marking, and storage of coated belts used on winding rollers of weaving machines. This standard applies to rubber, rubber-plastic, plastic, or other polymer material-coated belts (hereinafter referred to as "winding belts") used on winding rollers of weaving fabric holding and drawing-out mechanisms, as well as coated belts used on pressing rollers and fabric guide rollers of winding mechanisms of weaving machines, dyeing machines, and other equipment.

Development Information

Word Count: 10 Thousand words Pages: 7 pages

Referenced Standards

GB/T 1958-2004 Geometrical product Specifications(GPS)—Geometrical tolerance—Verification prescription GB/T 2941-2006 Rubber—General procedures for preparing and conditioning test pieces for physical test methods GB/T 191-2000 Packaging—Pictorial marking for handling of goods GB/T 191-2008 Packaging—Pictorial marking for handling of goods GB/T 321-1980 Preferred numbers and preferred number series GB/T 321-2005 Preferred numbers—Series of preferred numbers GB/T 532-1997 Rubber,vulcanized or thermoplastic—Determination of adhesion to textile fabric GB/T 532-2008 Rubber,vulcanized or thermoplastic—Determination of adhesion to textile fabric GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability) HG/T 2580-2022 Determination of tensile strength and elongation at break of rubber or plastic-coated fabrics HG/T 2580-2008 Rubber or plastic-coated fabric - Determination of tensile strength and elongation at break HG/T 2729-1995 The coefficient of friction between sulfurized rubber and thin sheets HG/T 2580-1994 Determination of tensile strength and tensile extension of rubber or plastic coated fabrics GB/T 191-2025 Graphical symbols marking for handling and storage of packages GB/T 2829-2025 Sampling procedures and tables for periodic inspection by attributes(Apply to inspection of process stability)

Related Standards

GB/T 8461-2003 Active

GB/T 8461-2003 Textile machinery and accessories—Cone sectional warping machines—Maximum usable width

Publish Date: 2003-02-10

GB/T 19385.1-2003 Active

GB/T 19385.1-2003 Textile machinery and accessories—Heald frames—Part1:Head-carrying rod fixed to the frame stave by rod support—Coordinated dimensions

Publish Date: 2003-11-10

GB/T 19385.2-2003 Active

GB/T 19385.2-2003 Textile machinery and accessories—Heald frames—Part2:heald-carrying rod fixed directly on the frame stave—Coordinated dimensions

Publish Date: 2003-11-10

GB/T 19385.3-2003 Active

GB/T 19385.3-2003 Textile machinery and accessories—Heald frames—Part3:Guides for heald frames

Publish Date: 2003-11-10

GB/T 19548-2004 Active

GB/T 19548-2004 Textile machinery and accessories—Weaving looms—Definition of left and right sides

Publish Date: 2004-06-11

GB/T 19551-2004 Active

GB/T 19551-2004 Textile machinery—Warp sizing machines—Maximum usable width

Publish Date: 2004-06-11