GB/T 5053.1-1985
Replaced
QC/T 549-2024
Active
Industry standards-Car
QC/T 549-2024 Vehicle alarm
QC/T 549-2024 Vehicle alarm
Basic Information
Standard Code:
QC/T 549-2024
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electronic and electrical equipment
ICS Name:
Electric and electronic equipment
Publish Date:
2024-11-07
Implement Date:
2025-05-01
Pages:
24 pages
Scope
This document specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage for reversing alarms and right-turn warning alarms for automobiles.
This document applies to reversing alarms for N2, N3, M2 (with a maximum design total mass of more than 3,500 kg) and M3 class automobiles, and right-turn warning alarms for N class vehicles (hereinafter collectively referred to as alarms). Other motor vehicles shall refer to and implement these requirements accordingly.
Development Information
Replace the following standards
QC/T 549-1999
Referenced Standards
GB/T 2423.17-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ka:Salt mist
GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB/T 3241-2010 Electroacoustics—Octave-band and fractional-octave-band filters
GB/T 3785.1-2023 Electroacoustics—Sound level meters—Part 1:Specifications
GB/T 15173-2010 Electroacoustics—Sound calibrators
GB/T 18655-2018 Vehicles,boats and internal combustion engines—Radio disturbance characteristics—Limits and methods of measurement for the protection of on-board receivers
GB/T 19951-2019 Road vehicles—Disturbances test methods for electrical/electronic component from electrostatic discharge
GB/T 21437.2-2021 Road vehicles—Test method of electrical disturbances from conduction and coupling—Part 2:Electrical transient conduction along supply lines only
GB/T 28046.2-2019 Road vehicles—Environmental conditions and testing for electrical and electronic equipment—Part 2:Electrical loads
GB/T 28046.3-2011 Road vehicles—Environmental conditions and testing for electrical and electronic equipment—Part 3:Mechanical loads
GB/T 28046.4-2011 Road vehicles—Environmental conditions and testing for electrical and electronic equipment—Part 4:Climatic loads
GB/T 30038-2013 Road vehicles—Degrees of electrical equipment protection(IP-Code)
GB/T 33014.1-2016 Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 1:General
GB/T 33014.2-2016 Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 2:Absorber-lined shielded enclosure
GB/T 33014.3-2016 Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 3:Transverse electromagnetic(TEM)cell
GB/T 33014.4-2016 Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 4:Bulk current injection (BCI)
GB/T 33014.5-2016 Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 5:Stripline
GB/T 34828-2017 Acoustics—Test methods for the qualification of free-field environments
GB/T 38694-2020 Requirements and test methods of alert for vehicle turning right
QC/T 238
GB/T 33014.2-2025 Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 2:Absorber-lined shielded enclosure
GB/T 33014.4-2025 Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 4:Harness excitation methods
GB/T 2829-2025 Sampling procedures and tables for periodic inspection by attributes(Apply to inspection of process stability)
Related Standards
GB/T 5053.2-1985
Replaced
GB/T 5053.2-1985 Electrical connections between motor vehicles and towed vehicles—Type 12N
GB/T 5053.3-1985
Replaced
GB/T 5053.3-1985 Test methods and requirements of electrical connections between motor vehicles and towed vehicles
GB/T 5054-1985
Replaced
GB/T 5054-1985 Seven-core connecting cable of motor vehicles and towed vehicles
GB/T 5337-1985
Active
GB/T 5337-1985 Nomenclature and terminology for automotive electrical equipment, lighting and instrumentation
GB 15742-2001
Replaced