YS/T 63.3-2016 Active Industry standards-Non-ferrous metals

YS/T 63.3-2016 Carbonaceous materials used in the production of aluminium—Part 3:Determination of the thermal conductivity—Comparative method

Publish Date: 2016-04-05 Implement Date: 2016-09-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: YS/T 63.3-2016

Standard Type: Industry standards

Standard Status: Active

is_force_gb: no

CCS Name: Carbon materials

ICS Name: Materials used in aluminum production

Publish Date: 2016-04-05

Implement Date: 2016-09-01

Pages: 7 pages

Scope

This part of YS/T 63 specifies the determination of the thermal conductivity of carbon materials for aluminum between 20 °C and 60 °C by the comparative method.
This part is applicable to the determination of the thermal conductivity of carbon materials for aluminum. The measurement range is 2 W/(K·m) to 200 W/(K·m).
This part is also applicable to the determination of the thermal conductivity of other carbon materials such as graphite electrodes.

Development Information

Word Count: 12 Thousand words Pages: 7 pages

Same series standard

YS/T 63.13-2016 Carbonaceous materials used in the production of aluminium—Part 13:Determination of elastic modulus

Replace the following standards

YS/T 63.3-2006 Carbonaceous materials used in the production of aluminium—Part 3:Determination of the thermal conductivity using a comparative method

Referenced Standards

GB/T 26297.1-2010 Sampling of carbonaceous materials used for aluminium production—Part 1:Cathode blocks GB/T 26297.2-2010 Sampling of carbonaceous materials used for aluminium production—Part 2:Sidewall blocks GB/T 26297.3-2010 Sampling of carbonaceous materials used for aluminium production—Part 3:Prebaked blocks GB/T 26297.4-2010 Sampling of carbonaceous materials used for aluminium production—Part 4:Cathodic pastes YS/T 63.1-2006 Carbonaceous materials used in the production of aluminium Part 1 Cathodic pastes—Preparation of baked test pieces、determination ofloss on baking and apparent density after ramming YS/T 63.1-2019 Aluminum-based carbon materials testing methods - Part 1: Baking methods for cathode paste specimens, determination of weight loss during baking, and determination of apparent density of green specimens

Related Standards

GB/T 6609.10-2004 Active

GB/T 6609.10-2004 Chemical analysis methods and determination of physical performance of alumina—Determination of vanadic oxide content-N-benzoy I-N-phenylhydroxylamine extraction photometric method

Publish Date: 2004-02-05

GB/T 6609.11-2004 Active

GB/T 6609.11-2004 Chemical analysis methods and determination of physical performance of alumina—Determination of manganous oxide content-Flame atomic absorption spectrophotometric method

Publish Date: 2004-02-05

GB/T 6609.1-2004 Replaced

GB/T 6609.1-2004 Chemical analysis methods and determination of physical performance of alumina—Determination of moisture-Gravimetric method

Publish Date: 2004-02-05

GB/T 6609.12-2004 Replaced

GB/T 6609.12-2004 Chemical analysis methods and determination of physical performance of alumina—Determination of zinc oxide content-Flame atomic absorption spectrophotometric method

Publish Date: 2004-02-05

GB/T 6609.13-2004 Active

GB/T 6609.13-2004 Chemical analysis methods and determination of physical performance of alumina—Determination of calcium oxide content-Flame atomic absorption spectrophotometric method

Publish Date: 2004-02-05

GB/T 6609.14-2004 Active

GB/T 6609.14-2004 Chemical analysis methods and determination of physical performance of alumina—Determination of fluorine content-Lanthanum-alizarincomplexone spectrophotometric method

Publish Date: 2004-02-05