GB/T 41171-2021
Active
National standards
GB/T 41171-2021 Urine-absorbing aids for incontinence—Measurement of airborne respirable polyacrylate superabsorbent materials—Determination of dust in collection cassettes by sodium atomic absorption spectrometry
GB/T 41171-2021 Urine-absorbing aids for incontinence—Measurement of airborne respirable polyacrylate superabsorbent materials—Determination of dust in collection cassettes by sodium atomic absorption spectrometry
Basic Information
Standard Code:
GB/T 41171-2021
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Extracorporeal circulation, artificial organs, and prosthetic devices
ICS Name:
Colostomy and incontinence equipment
Publish Date:
2021-12-31
Implement Date:
2021-12-31
Pages:
10 pages
Scope
This document describes a method for measuring the content of high-absorbency polyacrylic acid powder in airborne dust by atomic absorption spectrometry. Polypropylene acrylic acid dust samples are collected using polytetrafluoroethylene filters and porous plastic liners in polystyrene acrylonitrile air monitoring boxes. This document is suitable for measuring high-absorbency powders in the range of 0.2 μg to 60 μg (with a detection limit of approximately 0.2 μg). Note: This test is used to determine low levels of sodium and requires high-purity handling conditions. The use of deionized water/distilled water with extremely low sodium content is crucial for the success of the test analysis.
Development Information
Referenced Standards
ISO 3696:1987
Adopt standards
ISO 17191:2004
Related Standards
GB/T 20405.1-2006
Replaced
GB/T 20405.2-2006
Replaced
GB/T 20405.2-2006 Urine-absorbing aids for incontinence—Test methods for characterizing Polymer-based absorbent materials—Part 2:Determination of amount of residual monomers
GB/T 20405.3-2006
Replaced
GB/T 20405.3-2006 Urine-absorbing aids for incontinence—Test methods for characterizing Polymer-based absorbent materials—Part 3:Determination of particle size distribution by sieve fractionation
GB/T 20405.4-2006
Replaced
GB/T 20405.4-2006 Urine-absorbing aids for incontinence—Test methods for characterizing Polymer-based absorbent materials—Part 4:Determination of moisture content by mass loss upon heating
GB/T 20405.5-2006
Replaced
GB/T 20405.5-2006 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 5:Gravimetric determination of free swell capacity in saline solution
GB/T 20407.1-2006
Active