GB 12607-1990
Replaced
GB/T 12967.3-2022
Active
National standards
GB/T 12967.3-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 3:Salt spray test
GB/T 12967.3-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 3:Salt spray test
Basic Information
Standard Code:
GB/T 12967.3-2022
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
\nTest methods for the physical and chemical properties of metals
ICS Name:
Surface treatment
Publish Date:
2022-03-09
Implement Date:
2022-10-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国有色金属标准化技术委员会(SAC/TC 243)
Pages:
19 pages
Scope
本文件给出了铝及铝合金阳极氧化膜及有机聚合物膜盐雾试验的方法概述，并规定了试验条件、试剂、仪器设备、试样、测试步骤、结果表示及试验报告等内容。本文件适用于铝及铝合金阳极氧化膜、阳极氧化复合膜、有机聚合物膜耐盐雾腐蚀性能的测定。
Development Information
Drafting Units:
国合通用测试评价认证股份公司、广东伟业铝厂集团有限公司、福建省南平铝业股份有限公司、广东兴发铝业有限公司、天津新艾隆科技有限公司、广东豪美新材股份有限公司、铭帝集团有限公司、江阴恒兴涂料有限公司、佛山市三水凤铝铝业有限公司、广东省科学院工业分析检测中心、广东西敦千江粉漆科学研究有限公司、美国科潘诺实验设备公司上海代表处、国标(北京)检验认证有限公司
Drafting Persons:
樊志罡、张文梅、梁美婵、刘泉泉、黄文樑、史宏伟、朱世安、倪军、郝雪龙、林乾隆、黄妙清、刘英坤、朱新平、张恒
Same series standard
GB/T 12967.4-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 4:Determination of ultraviolet light and heat resistance
GB/T 12967.5-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 5:Assessment of resistance to cracking
GB/T 12967.6-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 6:Determination of color and appearance
Replace the following standards
Referenced Standards
GB/T 1766-1995 Paint and varnish—Rating schemes of degradation of coats
GB/T 1766-2008 Paints and varnishes—Rating schemes of degradation of coats
GB/T 6461-2002 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates—Rating of test specimens and manufactured articles subjected to corrosion tests
GB/T 8005.3-2008 Aluminium and aluminium alloys—Terms and definitions—Part 3:Surface treatment
GB/T 9754-1988 Paints and varnishes—Measurement of specular gloss of non-metallic paint films at 20°, 60°and 85°
GB/T 9754-2007 Paints and varnishes—Determination of specular gloss of non-metallic paint films at 20°,60°and 85°
GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10587-2006 Specifications for salt mist testing chambers
GB/T 11186.3-1989 Methods for measuring the color of paint films—Part 3:Calculation of color differences
GB/T 12967.6-2008 Test Methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 6:Determination of color differences and appearance of colored anodic oxide films by viewing method
GB/T 12967.6-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 6:Determination of color and appearance
GB/T 9754-2025 Paints and varnishes—Determination of gloss value at 20°、60° and 85°
Related Standards
GB/T 12612-1990
Replaced
GB/T 12612-1990 General specification for multifunctional solution of steel and iron surface treatment
GB/T 3138-1995
Replaced
GB/T 3138-1995 Terminology for metallic coating, chemical treatment and related process
GB/T 4955-1997
Replaced
GB/T 4955-1997 Metallic coatings—Measurement of coating thickness—Coulometric method by anodic dissolution
GB/T 17456-1998
Replaced
GB/T 17456-1998 Ductile iron pipes—External zinc-spray coating
GB/T 17460-1998
abolished_transferred