GB 19510.10-2004
Replaced
GB/T 25125-2010
Active
National standards
GB/T 25125-2010 Intelligent power saving device for lighting
GB/T 25125-2010 Intelligent power saving device for lighting
Basic Information
Standard Code:
GB/T 25125-2010
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electric lighting
ICS Name:
Other standards related to lighting
Publish Date:
2010-09-02
Implement Date:
2011-02-01
Pages:
10 pages
Scope
This standard specifies the technical requirements, inspection, packaging, transportation, and storage of intelligent lighting energy-saving devices (hereinafter referred to as energy-saving devices).
This standard applies to energy-saving devices with a rated voltage not exceeding 400 V, a rated frequency of 50/60 Hz, and a rated capacity not exceeding 2,500 kVA.
Development Information
Referenced Standards
GB 1094.2-1996 Power transformers—Part 2:Temperature rise
GB/T 1094.11-2007 Power transformers—Part 11:Dry-type transformers
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB 7251.1-2005 Low-voltage switchgear and control gear assemblies—Part 1:Type-tested and partially type-tested assemblies
GB 17625.1-2003 Electromagnetic compatibility—limits—Limits—for harmonic current emissions(equipment input current≤16A per phase
GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/Z 17625.6-2003 Electromagnetic compatibility—Limits—Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16A
GB/T 17743-2007 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 12325-2003 Power quality—Admissible deviation of supply voltage
GB/T 12325-2008 Power quality—Deviation of supply voltage
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB 19510.11-2004
Replaced
GB 19510.11-2004 Lamp controlgear—Part 11:Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps(neon tubes)
GB 19510.1-2004
Replaced
GB 19510.1-2004 Lamp control gear—Part 1:General and safety requirements
GB 19510.3-2004
Replaced
GB 19510.3-2004 Lamp controlgear—Part 3:Particular requirements for d.c.or a.c.supplied electronic step-down convertors for filament lamps
GB 19510.9-2004
Replaced
GB 19510.9-2004 Lamp control gear—Part 9:Particular requirements for ballasts for fluorescent lamps
GB 19510.12-2005
Replaced