GB/T 5170.5-2008 Replaced National standards

GB/T 5170.5-2008 Inspection methods for environmental testing equipments for electric and electronic products—Damp heat testing equipments

GB/T 5170.5-2008 Inspection methods for environmental testing equipments for electric and electronic products—Damp heat testing equipments

Publish Date: 2008-06-16 Implement Date: 2009-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 5170.5-2008

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Basic standards and general methods

ICS Name: Environment testing

Publish Date: 2008-06-16

Implement Date: 2009-03-01

Pages: 16 pages

Scope

This part of GB/T 5170 specifies the inspection items, main instruments and requirements for humidity and heat testing equipment, test loads, test conditions, test methods, data processing results and test results, and inspection cycles, etc. This part is applicable to the initial inspection/acceptance inspection and periodic inspection of the testing equipment used in GB/T 2423.3 "Environmental Testing for Electrical and Electronic Products - Part 2: Test Methods - Test Cab: Constant Humidity and Heat Testing", GB/T 2423.4 "Environmental Testing for Electrical and Electronic Products - Part 2: Test Methods - Test Db: Alternating Humidity and Heat Testing", and GB/T 2423.16 "Environmental Testing for Electrical and Electronic Products - Part 2: Test Methods - Test J: Long-term Mold Growth Testing".

Development Information

Word Count: 25 Thousand words Pages: 16 pages

Same series standard

GB/T 5170.1-2008 Inspection methods for environmental testing equipments for electric and electronic products—General GB/T 5170.2-2008 Inspection methods for environmental testing equipments for electric and electronic products—Temperature testing equipments GB/T 5170.8-2008 Inspection methods for environmental testing equipments for electric and electronic products—Salt mist testing equipments GB/T 5170.9-2008 Inspection methods for environmental testing equipments for electric and electronic products—Solar radiation testing equipments GB/T 5170.10-2008 Inspection methods for environmental testing equipments for electric and electronic products—Combined high and low temperature/low air pressure testing equipments GB/T 5170.11-2008 Inspection methods for environmental testing equipments for electric and electronic products—Corrosive gas testing equipments GB/T 5170.21-2008 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products—Hydraulic vibrating type machines for vibration(random)test

Replace the following standards

GB/T 5170.5-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products—Damp heat testing equipments

Superseded by the following standards

GB/T 5170.5-2016 Inspection methods for environmental testing equipments for electric and electronic products—Part 5:Damp heat testing equipments

Referenced Standards

GB/T 5170.1-2008 Inspection methods for environmental testing equipments for electric and electronic products—General IEC 60751 GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB/T 2423.16-1999 Environmental testing for electric and electronic products—Part 2:Tests methods—Test J and guidance:Mould growth GB/T 2423.16-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test J and guidance:Mold growth GB/T 2423.16-2022 Environmental testing—Part 2:Test methods—Test J and guidance:Mould growth GB/T 2424.6-2006 Environmental testing for electric and electronic products—Confirmation of the performance of temperature/humidity chambers GB/T 2424.6-2021 Environmental testing—Part 3: Supporting documentation and guidance—Confirmation of the performance of temperature/humidity chambers GB/T 6999-1986 Relative humidity tables for environmental test GB/T 6999-2010 Relative humidity tables for environmental test GB/T 16839.1-1997 Thermocouples—Part 1:Reference tables GB/T 16839.1-2018 Thermocouples—Part 1:EMF specifications and tolerances

Related Standards

GB/T 6587.1-1986 Replaced

GB/T 6587.1-1986 Environmental tests program for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.2-1986 Replaced

GB/T 6587.2-1986 Temperature tests for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.3-1986 Replaced

GB/T 6587.3-1986 Humidity tests for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.4-1986 Replaced

GB/T 6587.4-1986 Vibration tests for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.5-1986 Replaced

GB/T 6587.5-1986 Shock tests for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.6-1986 Replaced

GB/T 6587.6-1986 Transportation tests for electronic measuring instruments

Publish Date: 1986-07-23