T/XJQGX 001-2024 Active Group standards

T/XJQGX 001-2024 International Technical Specification for Soft-Covered, Sealed Container on Road Transport。

Publish Date: 2024-03-04 Implement Date: 2024-03-11 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/XJQGX 001-2024

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: -

ICS Name: Other standards related to the transportation of goods

Publish Date: 2024-03-04

Implement Date: 2024-03-11

Scope

Scope: This standard specifies the terms and definitions, dimensions, shapes, technical requirements, inspection methods, inspection rules, and traceability management of soft-curtain enclosed containers for international road transport. Main technical content: 4.3 Requirements for the quality of soft curtains 4.3.1 Materials and appearance The soft curtain fabric shall be made of thick canvas or coated fabric, or fabric processed by plastic coating. It shall have sufficient strength, be wear-resistant and durable, and not prone to elongation. The coating shall be uniform in thickness and consistent in color, without defects such as uncoated areas, clumping, holes, delamination, wrinkling, or damage. The seams of the edges shall be straight, without loose stitches, broken threads, or exposed threads. 4.3.2 Waterproof performance The waterproof performance shall comply with the HG/T 2582 standard, the low-temperature resistance shall comply with the FZ/T 01007 standard, and the flame retardancy shall comply with the XF/T 91 standard for flame-retardant tarpaulins. 4.3.3 Seam welding If the tarpaulin is made of several pieces, the edges of the pieces shall be folded and sewn together with at least 15 mm of spacing between the seams. For parts of the tarpaulin (such as flaps and reinforced corners) that cannot be sewn together in the above-mentioned manner, only the edge at the top shall be folded and sewn. One of the seams shall only be visible from the back, and the color of the thread used shall be distinctly different from that of the tarpaulin and the other seam. All seams shall be machine-sewn. 4.3.4 Melt welding If the tarpaulin is coated with plastic and made of several pieces, the pieces shall be overlapped by at least 15 mm, and the entire width of the overlapped area shall be welded by melting. The edges of the outer tarpaulin shall be reinforced with a plastic strip of at least 7 mm in width. The plastic strip and its edges shall be stamp