GB/T 33150-2016 Active National standards

GB/T 33150-2016 Five-axis simultaneous control plano-milling machines with a travelin goverhead cross raill—Testing of the accuracy

Publish Date: 2016-10-13 Implement Date: 2017-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 33150-2016

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Drilling, boring, and milling machines

ICS Name: Lathes and milling machines

Publish Date: 2016-10-13

Implement Date: 2017-05-01

Pages: 30 pages

Scope

This standard specifies the requirements and inspection methods for the geometric accuracy, positioning accuracy, and working accuracy of five-axis linkage overhead gantry mobile milling machines, as well as the corresponding tolerances.
This standard applies to five-axis linkage overhead gantry mobile milling machines (hereinafter referred to as machine tools) with a maximum table size of 3,000 mm × 10,000 mm and five NC axes, namely three linear axes (X, Y, Z) and two rotary axes (A, C) or (B, C).

Development Information

Word Count: 54 Thousand words Pages: 30 pages

Referenced Standards

GB/T 17421.1-1998 Test code for machine tools—Part 1:Geometric accuracy of machines operating under no-load or finishing conditions GB/T 17421.2-2016 Test code for machine tools—Part 2:Determination of accuracy and repeatability positioning numerically controlled axes

Related Standards

GB/T 3932-1983 Replaced

GB/T 3932-1983 Milling machines with table of fixed height with horizontal or vertical spindle—Testing of the accuracy

Publish Date: 1983-11-09

GB/T 5289.2-2000 Replaced

GB/T 5289.2-2000 Test conditions for boring and milling machines with horizontal spindle—Testing of the accuracy—Part 2:Table—type machines

Publish Date: 2000-02-18

GB/T 3933.2-2002 Replaced

GB/T 3933.2-2002 Test conditions for milling machines with table of variable height—Testing of accuracy—Part 2:Machines with horizontal spindle

Publish Date: 2002-09-13

GB/T 3933.3-2002 Active

GB/T 3933.3-2002 Test conditions for milling machines with table of variable height—Testing of accuracy—Part 3:Machines with vertical spindle

Publish Date: 2002-09-13

GB/T 19362.1-2003 Active

GB/T 19362.1-2003 Machine tools—Test conditions for bridge-type milling machines—Testing of the accuracy—Part 1:Fixed bridge (portal-type)machines

Publish Date: 2003-11-10

GB/T 9167-2003 Replaced

GB/T 9167-2003 Spline hobbing machines—Testing of the accuracy

Publish Date: 2003-11-10