GB/T 2423.23-2013 Active National standards

GB/T 2423.23-2013 Environmental testing—Part 2:Test methods—Test Q:Sealing

GB/T 2423.23-2013 Environmental testing—Part 2:Test methods—Test Q:Sealing

Publish Date: 2013-11-12 Implement Date: 2014-03-07 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 2423.23-2013

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Basic standards and general methods

ICS Name: Environment testing

Publish Date: 2013-11-12

Implement Date: 2014-03-07

Pages: 39 pages

Scope

This part of GB/T 2423 specifies various sealing performance test methods. Test Qa, Qc are preliminary inspections, observing the bubbles emerging from the leakage gap; Test Qd is to observe the leakage of liquids under heating conditions; Test Qy is to let gases enter the test box through the leakage gap under pressure reduction conditions, and then measure the performance changes of the test box; Tests Qk and Qm use tracer gases to detect fine leaks; Tests Qf and Ql are to let liquids enter the test box through the leakage gap under pressure conditions, and then measure their performance changes.
This part is suitable for testing the sealing performance of various electrical and electronic products, and also for the sealing detection of other sealing components.

Development Information

Word Count: 63 Thousand words Pages: 39 pages

Same series standard

GB/T 2423.19-2013 Environmental testing—Part 2:Test methods—Test Kc:Sulphur dioxide test for contacts and connections GB/T 2423.24-2013 Enviromental testing—Part 2:Test methods—Test Sa:Simulated solar radiation at ground level and guidance for solar radiation testing GB/T 2423.30-2013 Environmental testing—Part 2:Test methods—Test XA and guidance:Immersion in cleaning solvents GB/T 2423.40-2013 Environmental testing—Part 2:Test methods—Test Cx:Damp heat,steady state(unsaturated pressurized vapour) GB/T 2423.41-2013 Environmental testing—Part 2:Test methods—Wind pressure

Replace the following standards

GB/T 2423.23-1995 Environmental testing for electric and electronic products Test Q:Sealing

Referenced Standards

GB/T 2421.1-2008 Environmental testing for electric and electronic products—General and guidance GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)

Adopt standards

IEC 60068-2-17:1994

Related Standards

GB/T 6587.1-1986 Replaced

GB/T 6587.1-1986 Environmental tests program for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.2-1986 Replaced

GB/T 6587.2-1986 Temperature tests for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.3-1986 Replaced

GB/T 6587.3-1986 Humidity tests for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.4-1986 Replaced

GB/T 6587.4-1986 Vibration tests for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.5-1986 Replaced

GB/T 6587.5-1986 Shock tests for electronic measuring instruments

Publish Date: 1986-07-23

GB/T 6587.6-1986 Replaced

GB/T 6587.6-1986 Transportation tests for electronic measuring instruments

Publish Date: 1986-07-23