GB/T 25668.2-2010 Active National standards

GB/T 25668.2-2010 Modular tooling system for boring and milling Part 2:TMG21 tooling system dimensions

Publish Date: 2010-12-23 Implement Date: 2011-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 25668.2-2010

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Knives

ICS Name: Cutting tools

Publish Date: 2010-12-23

Implement Date: 2011-07-01

Pages: 29 pages

Scope

This part of GB/T 25668 specifies the types and dimensions of various modules in the TMG21 tool system. The model designation rules for the TMG21 tool system are in accordance with the provisions of GB/T 25668.1.
This part is applicable to the TMG21 tool system.

Development Information

Word Count: 55 Thousand words Pages: 29 pages

Same series standard

GB/T 25668.1-2010 Modular tooling system for boring and milling Part 1:Designation

Referenced Standards

GB/T 3837-2001 7/24 tapers for tool shanks for manual changing GB/T 5342.1-2006 Face milling cutter with indexable inserts—Part 1:Shell face milling cutter GB/T 6133.1-2006 Tool chucks for flated parallel shank tools—Part 1:Dimensions of the driving system of tool shanks GB/T 19449.1-2004 Hollow taper interface with flange contact surface—Part 1:Shanks—Dimensions ISO 7388-1:2007 ISO 7388-2:2007 ISO/DIS 10643 ISO 15488:2003 ISO 26622-1:2008 ISO 26623-1:2008 GB/T 79-2000 Hexagon socket set screws with dog point GB/T 79-2007 Hexagon socket set screws with dog point GB/T 25668.1-2010 Modular tooling system for boring and milling Part 1:Designation

Related Standards

GB/T 2076-1987 Replaced

GB/T 2076-1987 Indexable inserts for cutting tools—Designation

Publish Date: 1987-06-26

GB/T 2077-1987 Replaced

GB/T 2077-1987 Indexable hardmetal (carbide) inserts—Corner radii

Publish Date: 1987-06-26

GB/T 2078-1987 Replaced

GB/T 2078-1987 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole

Publish Date: 1987-06-26

GB/T 2079-1987 Replaced

GB/T 2079-1987 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole—Dimensions

Publish Date: 1987-06-26

GB/T 2080-1987 Replaced

GB/T 2080-1987 Indexable hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole—Part 1:Dimensions of inserts with 7°normal clearance

Publish Date: 1987-06-26

GB/T 2081-1987 Replaced

GB/T 2081-1987 Indexable hardmetal (carbide)inserts with wiper edges, without fixing hole—Dimensions

Publish Date: 1987-06-26