T/TCCT 001-2022 Active Group standards

T/TCCT 001-2022 Laser precision machining equipment inspection and testing specification

Publish Date: 2021-10-29 Implement Date: 2022-05-08 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/TCCT 001-2022

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: -

ICS Name: Mechanical processing center

Publish Date: 2021-10-29

Implement Date: 2022-05-08

Scope

Scope: This document specifies the product categories, characteristic requirements, general safety requirements, testing methods, marking, and documentation for laser precision processing equipment. This document applies to laser precision processing equipment, including the associated lasers used with it. Main technical content: Project Unit Requirements Spot diameter percentage deviation within ±10% of the nominal value Spot roundness percentage > the nominal value Divergence angle in milliradians (mrad) < 2.0 mrad (Full Angle) Beam pointing stability per minute or per degree Celsius (Per Minute/Per ℃) < 50.0 urad Beam quality M2 percentage deviation within ±10% of the nominal value Pulse energy instability root mean square (rms) < 2% Pulse width percentage within 50%-100% of the nominal value Polarization ratio Laser transmittance ratio > 100:1 Average power stability root mean square (rms) < 2%

Development Information

Related Standards

GB/T 18400.6-2001 Replaced

GB/T 18400.6-2001 Test conditions for machining centres—Part 6:Accuracy of feeds, speeds and interpolations

Publish Date: 2001-07-20

GB/T 18400.8-2001 Active

GB/T 18400.8-2001 Test conditions for machining centres—Part 8:Evaluation of the contouring performance in the three coordinate planes

Publish Date: 2001-07-20

GB 18568-2001 Replaced

GB 18568-2001 Machining centres—Safeguarding specification

Publish Date: 2001-12-13

GB/Z 19219-2003 Active

GB/Z 19219-2003 Industrial automation—Time-critical communications architectures—User requirements and network management for time-critical communications systems

Publish Date: 2003-06-26

GB/T 20957.1-2007 Active

GB/T 20957.1-2007 Test conditions for precision machining centres—Part 1:Geometric tests for machines with horizontal spindle and with accessory heads(horizontal Z axis)

Publish Date: 2007-06-25

GB/T 20957.2-2007 Active

GB/T 20957.2-2007 Test conditions for machining centres—Part 2:Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis(vertical Z-axis)

Publish Date: 2007-06-25