T/CI 108-2022 Abolished Group standards

T/CI 108-2022 Compressed Heat Rejuvenating Absorption Compressed Air Drier

Publish Date: 2022-11-14 Implement Date: 2022-11-14 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/CI 108-2022

Standard Type: Group standards

Standard Status: Abolished

is_force_gb: no

CCS Name: -

ICS Name: Compressors and pneumatic machinery

Publish Date: 2022-11-14

Implement Date: 2022-11-14

Scope

Scope: This document specifies the operating environment requirements, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage for compressed heat regeneration adsorption air dryers (hereinafter referred to as "dryers"). This document applies to low-air-consumption compressed heat regeneration adsorption air dryers. Main technical content: 4. Operating environment requirements 4.1 The environment shall meet the following requirements: — Ambient temperature: 5°C to 50°C; — Relative humidity: ≤85%; — Atmospheric pressure: 86 kPa to 106 kPa. 4.2 Power supply shall meet the following requirements: — Power frequency: 50 Hz ± 1 Hz; — Power voltage: Three-phase: 380 V ± 30 V; Single-phase: 220 V ± 22 V. 4.3 Cooling water shall meet the following requirements: — Water supply pressure: 0.2–0.5 MPa (G); — Water supply temperature: ≤32°C; — pH value: 6–8; — Suspended matter content: ≤100 mg/L; — Total hardness: ≤3.2 mmol/L. 4.4 Compressed air shall meet the following requirements: — Inlet humidity: 100%; — Inlet temperature: ≥100°C; — Oil content: ≤1 mg/m3. 5. Technical requirements 5.1 Appearance 5.1.1 The surface of the dryer shall not have protrusions, depressions, roughness, or other damage. 5.1.2 The coating shall be uniform and shall not have bubbles, delamination, or obvious scratches. 5.2 Start-up trial run After the dryer is started, it shall operate smoothly. 5.3 Imported volume flow The dryer shall be able to achieve the nominal processing capacity.