GB/T 3654.10-1983
Replaced
GB/T 3653.4-2025
Active
National standards
GB/T 3653.4-2025 Ferroboron—Determination of aluminum content—EDTA titrimetric method,chrome azurol S spectrophotometric method and inductively coupled plasma atomic emission spectrometric method
GB/T 3653.4-2025 Ferroboron—Determination of aluminum content—EDTA titrimetric method,chrome azurol S spectrophotometric method and inductively coupled plasma atomic emission spectrometric method
Basic Information
Standard Code:
GB/T 3653.4-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Analysis methods for steel and iron alloys
ICS Name:
Iron alloy
Publish Date:
2025-08-29
Implement Date:
2026-03-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国生铁及铁合金标准化技术委员会(SAC/TC 318)
Pages:
20 pages
Scope
本文件描述了EDTA滴定法、铬天青S分光光度法和电感耦合等离子体发射光谱法测定硼铁中的铝含量。
本文件适用于硼铁中铝含量的测定,测定范围(质量分数):0.02%~8.00%。方法一:EDTA滴定法测定范围(质量分数):1.00%~8.00%;方法二:铬天青S分光光度法测定范围(质量分数):0.02%~1.00%;方法三:电感耦合等离子体发射光谱法测定范围(质量分数):0.02%~1.00%。
Development Information
Drafting Units:
山东省冶金科学研究院股份有限公司、无锡卓浪材料科技有限公司、方同舟控股有限公司、江苏省镔鑫钢铁集团有限公司、中国检验认证集团河北有限公司、辽阳国际硼合金有限公司、内蒙古新太元新材料有限公司、河北津西钢铁集团股份有限公司、吉铁铁合金有限责任公司、冶金工业信息标准研究院
Drafting Persons:
张莉、吴丽娟、高洪吉、李静、孙咏芬、崔晓翠、丁晓彤、刘君丽、武治峰、赵利欣、林滔、陈万峰、周瑞东、王莹莹、陶智、王超、曹发卫、李京霖、王立霞、徐志彬、孟丽丽、蒋洪娇、孙风晓、褚衍顺、叶俊莹、杜倩倩、刘飞、郑海东、郑红宁、王昊、卢春生、程昭阳
Replace the following standards
Referenced Standards
GB/T 4010-1994 Ferroalloys—Sampling and preparation of samples for chemical analysis
GB/T 4010-2015 Ferroallys sampling and preparation of samples for chemical analysis
GB/T 6379.1-2004 Accuracy(trueness and precision)of measurement methods and results—Part 1:General principles and definitions
GB/T 6379.2-2004 Accuracy(trueness and precision)of measurement methods and results—Part 2:Basic method for the determination of repeatability and reproducibility of a standard measurement method
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB/T 7729-2021 Chemical analysis of metallurgical products—General rule for spectrophotometric methods
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 12805-1991 Laboratory glassware—Burettes
GB/T 12805-2011 Laboratory glassware—Burettes
GB/T 12806-1991 Laboratory glassware—One-mark volumetric flasks
GB/T 12806-2011 Laboratory glassware—One-mark volumetric flasks
GB/T 12807-1991 Laboratory glassware—Graduated pipettes
GB/T 12807-2021 Laboratory glassware—Graduated pipettes
GB/T 12808-1991 Laboratory glassware—One-mark pipettes
GB/T 12808-2015 Laboratory glassware—One mark pipettes
JJG 768-2005 Emission Spectrometer
Related Standards
GB/T 3654.1-1983
Active
GB/T 3654.1-1983 Methods for chemical analysis of ferroniobium—The paper chromatograph-gravimetric method for the determination of niobium and tantalum
GB/T 3654.2-1983
Replaced
GB/T 3654.2-1983 Methods for chemical analysis of ferroniobium—The neocuproine-chloroform extraction photometric method for the determination of copper content
GB/T 3654.3-1983
Replaced
GB/T 3654.3-1983 Methods for chemical analysis of ferroniobium The gravimetric method for the determination of silicon content
GB/T 3654.4-1983
Active
GB/T 3654.4-1983 Methods for chemical analysis of ferroniobium The combustion gravimetric method for the determination of carbon content
GB/T 3654.5-1983
Active