GB/T 7674-2008
Replaced
National standards
GB/T 7674-2008 Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
GB/T 7674-2008 Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
Basic Information
Standard Code:
GB/T 7674-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
High-voltage switchgear
ICS Name:
High-voltage switchgear and controllers
Publish Date:
2008-09-19
Implement Date:
2009-06-01
Pages:
48 pages
Scope
This standard specifies the gas-insulated metal-enclosed switchgear installed indoors and outdoors with a rated voltage of 72.5 kV and above and a rated frequency of 50 Hz, where the insulation is achieved at least in part by insulating gas rather than air under atmospheric pressure.
For the convenience of using this standard, the terms "GIS" and "switchgear" are both used to describe "gas-insulated metal-enclosed switchgear".
The gas-insulated metal-enclosed switchgear covered by this standard consists of separate components that can be directly connected together, and these components can only operate in this manner.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 9326.5-2008 Oil-filled,paper or polypropylene paper laminate insulated,metal-sheathed cables and accessories for alternating voltages up to and including 500 kV—Part 5:Pressure tanks
GB/T 11017.1-2002 Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 110kV—Part 1:Test methods and requirements
GB/T 11023-1989
GB/T 12022-2006 Sulphur hexafluoride for industrial use
GB/T 22381-2008 Cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above—Fluid-filled and extruded insulation power cables—Fluid-filled and dry type cable-terminations
GB/T 22381-2017 Cable connections between gas-insulated metal-enclosed switchgear for rated voltages equal to and above 72.5 kV and fluid-filled and extruded insulation power cables—Fluid-filled and dry type cable-terminations
GB/T 22382-2008 Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages of 72.5kV and above
GB/T 22382-2017 Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
ISO 3231
IEC 60815
IEC 61462
IEC 61672-1
IEC 61672-2
IEC 62067
IEC 62155
Adopt standards
IEC 62271-203:2003
Related Standards
GB/T 14808-2001
Replaced
GB 1984-2003
Replaced
GB 1984-2003 High-voltage alternating-current circuit-breakers
GB 1985-2004
Replaced
GB 1985-2004 High-voltage alternating-current disconnectors and earthing switches
GB/T 4473-2008
Replaced
GB/T 4473-2008 Synthetic testing of High-voltage alternating current circuit-breakers
GB/T 22381-2008
Replaced
GB/T 22381-2008 Cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above—Fluid-filled and extruded insulation power cables—Fluid-filled and dry type cable-terminations
GB/T 22382-2008
Replaced