GB/T 1029-2005 Test procedures for three-phase synchronous machines

GB/T 1029-1993 Test procedures for three-phase synchronous machines

GB/T 1029-2021 Test procedures for three-phase synchronous machines

GB 755-2000 Rotating electrical machines—Rating and performance GB/T 10069.2 GB/T 10585 JB/T 7836.1 JB/T 10098 IEC 60034-2 IEC 60034-4 GB/T 5321-1985 Measurement of loss and efficiency for large AC electrical machines by the calorimetric method GB/T 5321-2005 Measurement of loss and efficiency for electrical machine by the calorimetric method GB/T 7409.3-1997 Excitation system for synchronous electrical machines—Technical requirements of excitation system for large and medium synchronous generators GB/T 7409.3-2007 Excitation system for synchronous electrical machines—Technical requirements of excitation system for large and medium synchronous generators GB 10068-2000 Mechanical vibration of certain machines with shaft heights 56mm and higher—Measurement,evaluation and limits of vibration GB/T 10068-2008 Mechanical vibration of certain machines with shaft heights 56 mm and higher—Measurement,evaluation and limits of vibration severity GB/T 10068-2020 Mechanical vibration of certain machines with shaft heights 56 mm and higher—Measurement,evaluation and limits of vibration severity GB/T 10069.1-2006 Measurement of the airborne noise emitted by rotating electrical machines and the noise limits—Part 1:Method for the measurement of airborne noise emitted by rotating electrical machines GB/T 15548-1995 General specification for three-phase synchronous generator driven by reciprocating internal combustion engine GB/T 15548-2008 General specification for three-phase synchronous generators driven by reciprocating internal combustion engine GB/T 15548-2023 General specification for three-phase synchronous generators driven by reciprocating internal combustion engine JB/T 6227-2021 Testing method and evaluation of hydrogen-cooled motor gas seals JB/T 6227-2005 The test method and evaluation of hydrogen-cooled motor gas tightness JB/T 6227-2005 JB/T 8446-2013 JB/T 8990-1999 Large-scale turbine generator stator end winding modal test analysis, intrinsic frequency measurement method, and evaluation JB/T 9615.2-2000 The inter-turn insulation test limit value for the loose-wound winding of low-voltage motors JB/T 10500.1-2019 Electric current inserted type thermal resistance for motor Part 1: General regulations, measurement methods and inspection rules. (Translation) JB/T 8446-2005 JB/T 9615.1-2000 JB/T 6227-1992 The method for inspecting the tightness of hydrogen-cooled motors and its evaluation JB/T 8445-1996