GB/T 13933-2008 Active National standards

GB/T 13933-2008 Miniature cross-flow fan

GB/T 13933-2008 Miniature cross-flow fan

Publish Date: 2008-11-12 Implement Date: 2009-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 13933-2008

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Compressors and fans

ICS Name: Ventilation and air conditioning

Publish Date: 2008-11-12

Implement Date: 2009-05-01

Pages: 9 pages

Scope

This standard specifies the terms and definitions, types and basic parameters, requirements, test methods, inspection rules, marking, packaging, and storage of small centrifugal fans (hereinafter referred to as "fans").
This standard applies to small centrifugal fans with an impeller outer diameter not exceeding 300 mm.

Development Information

Word Count: 16 Thousand words Pages: 9 pages

Replace the following standards

GB/T 13933-1992 Miniature cross-flow fan

Referenced Standards

GB/T 1236-2000 Industrial fans—Performance testing using standardized airways GB/T 191-2000 Packaging—Pictorial marking for handling of goods GB/T 191-2008 Packaging—Pictorial marking for handling of goods GB/T 2888-1991 Methods of noise measurement for fans, blowers compressors and Roots blowers GB/T 2888-2008 Methods of noise measurement for fans blowers compressors and Roots blowers GB/T 5171-2002 General technical requirements for small power motors GB/T 5171.1-2014 Small power motors—Part 1:General technical requirements GB/T 5171.21-2016 Small power motors—Part 21:General test methods GB/T 5171.22-2017 Small-power motors—Part 22:Test methods for permanent magnet brushless DC motors GB/T 13306-1991 Plates GB/T 13306-2011 Plates JB/T 6445-2005 Industrial blower impeller overspeed test JB/T 8689-2014 Ventilation fan vibration detection and its limit value JB/T 9065-2015 Refrigeration and air conditioning equipment packaging general technical specification JB/T 9101-2014 Fan rotor balancing JB/T 8689-1998 Ventilation fan vibration detection and its limit value JB/T 9062-1999 Heating, Ventilation, and Air Conditioning Equipment Painting Technical Specification JB/T 9065-1999 The Common Technical Conditions for Packaging of Cold and Warm Ventilation Equipment, JB/T 9065-1999 JB/T 9101-1999 Fan rotor balancing GB/T 191-2025 Graphical symbols marking for handling and storage of packages

Related Standards

GB/T 6165-1985 Replaced

GB/T 6165-1985 Methods for testing the performance of high efficiency particulate air filter—Penetration and resistance

Publish Date: 1985-06-18

GB/T 6166-1985 Replaced

GB/T 6166-1985 Methods for testing the performance of high efficiency filter media—Penetration and resistance

Publish Date: 1985-06-18

GB/T 6167.1-1985 Replaced

GB/T 6167.1-1985 Methods for testing the performance of dust particle counter—Calibration for sizing particle

Publish Date: 1985-06-18

GB/T 6167.2-1985 Replaced

GB/T 6167.2-1985 Methods for testing the performance of dust particle counter—Particle concentration

Publish Date: 1985-06-18

GB/T 7725-1996 Replaced

GB/T 7725-1996 Room air conditioners

Publish Date: 1996-04-24

JG/T 14-1999 Replaced

JG/T 14-1999 Air outlets and inlets for ventilation and air conditioning

Publish Date: 1999-06-04