GB/T 6531-1986
Active
GB/T 18612-2011
Active
National standards
GB/T 18612-2011 Determination of organic chloride content in crude oil
GB/T 18612-2011 Determination of organic chloride content in crude oil
Basic Information
Standard Code:
GB/T 18612-2011
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Crude oil
ICS Name:
Crude oil
Publish Date:
2011-09-29
Implement Date:
2012-01-01
Pages:
11 pages
Scope
1.1 This standard specifies two methods for determining the organic chlorine content of crude oil. These include Method A - Reduction potential titration with sodium dibenzoate, and Method B - Combustion oxidation microcoulometry.
1.2 This standard is applicable to crude oil with an organic chlorine content greater than 1 μg/g. However, Method B is not suitable for crude oil with a total sulfur content that exceeds 10,000 times the organic chlorine content.
Development Information
Replace the following standards
Referenced Standards
GB/T 4756-1998 Petroleum liquids—Manual sampling
GB/T 4756-2015 Method for manual sampling of petroleum liquids
GB/T 6536-1997 Petroleum products—Determination of distillation
GB/T 6536-2010 Standard test method for distillation of petroleum products at atmospheric pressure
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
SY/T 5317-2006 SY/T 5317-2006 Petroleum liquid pipeline automatic sampling method
Adopt standards
ASTM D4929-2007
Related Standards
GB/T 6532-1986
Replaced
GB/T 6532-1986 Crude petroleum and products—Determination of salt content
GB/T 6533-1986
Replaced
GB/T 6533-1986 Crude petroleum—Determination of water and sadiment—Centrifuge method
GB/T 8929-1988
Replaced
GB/T 8929-1988 Crude oil—Determination of water—Distillation method
GB/T 13377-1992
Replaced
GB/T 13377-1992 Crude petroleum and liquid or solid petroleum products—Determination of density or relative density—Capillary stoppered pyknometer and graduated bicapillary pyknometer method
GB/T 17280-1998
Replaced