T/SXCIES 001-2023 Electrochemical treatment industrial circulating cooling water technical specification
T/SXCIES 001-2023 Electrochemical treatment industrial circulating cooling water technical specification
Basic Information
Scope
Main Technical Content: Technical Specifications for Electrochemical Treatment of Industrial Circulating Cooling Water 1 Scope This document specifies the general requirements, technical standards, daily maintenance, and operation methods for electrochemical treatment of industrial circulating cooling water. It applies to electrochemical treatment of industrial circulating cooling water. 2 Normative Reference Documents The content of the following documents is an integral part of this document through normative reference. Among them, the referenced documents with a specified date apply only to the version corresponding to that date; the latest version (including all amendment sheets) of the non-dated referenced documents applies to this document. - GB/T 15452: Determination of Calcium and Magnesium Ions in Industrial Circulating Cooling Water by EDTA Titration - GB/T 15453: Determination of Chloride Ions in Industrial Circulating Cooling Water and Boiler Water - GB/T 18175: Determination of Corrosion Inhibition Performance of Water Treatment Agents by Rotating Strip Test - GB/T 50050: Design Specifications for Industrial Circulating Cooling Water Treatment 3 Terms and Definitions The following terms and definitions apply to this document. 3.1 DC Power Supply Provides electrical energy for electrochemical equipment. 3.2 Anode The electrode connected to the positive terminal of the electrochemical power supply, where oxidation reactions occur. 3.3 Cathode The electrode connected to the negative terminal of the electrochemical power supply, where reduction reactions occur. 3.4 Electrochemical Equipment for Industrial Circulating Cooling Water Treatment An energy-saving and water-saving water treatment equipment with functions such as descaling, antifouling, and sterilization. 4 General Requirements 4.1 The electrochemical treatment of industrial circulating cooling water should have functions such as hardness removal, antifouling