GB 19510.10-2004
Replaced
GB/T 39008-2020
Active
National standards
GB/T 39008-2020 Double-capped integrated LED lamps—Performance requirements
GB/T 39008-2020 Double-capped integrated LED lamps—Performance requirements
Basic Information
Standard Code:
GB/T 39008-2020
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electric light source products
ICS Name:
Other standards related to lighting
Publish Date:
2020-07-21
Implement Date:
2021-02-01
Pages:
13 pages
Scope
This standard specifies the terms and definitions, specification classification and naming, technical requirements, test methods, and inspection rules for two-ended integrated LED lamps with G5 or G13 lamp heads, used in lamps with G5 or G13 lamp sockets without ballasts.
This standard applies to two-ended integrated LED lamps with a rated power of 60 W or less, a frequency of 50 Hz, a rated voltage of AC 220 V, a nominal length of 1,500 mm or less, and a beam angle of 120° or more.
This standard also applies to modified two-ended integrated LED lamps that have had the ballast disconnected.
Note 1: Unless otherwise specified as another type of lamp, the term "lamp" in this standard refers to "two-ended integrated LED lamps".
Note 2: The rated voltage refers to the power supply voltage of the lamp.
Development Information
Referenced Standards
GB/T 24823-2017 LED modules for general lighting—Performance requirements
GB/T 24826-2016 General lighting-Light emitting diode(LED) products and related equipment—Terms and definitions
GB/T 29295-2012 Test methods of performance of self-ballasted LED reflector lamps
IES TM-21-11 LED
GB/T 1406.2-2008 Types and dimentions of lamp caps—Part 2:Pin lamp caps
GB/T 1483.2-2002 Gauges of edison screw lampholders
GB/T 1483.2-2008 Gauges for caps and lampholders—Part 2:Gauges for pin caps and lampholders
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB/T 10682-2002 Double-capped fluorescent lamps—Performance specifications
GB/T 10682-2010 Double-capped fluorescent lamps—Performance specifications
GB 17625.1-2003 Electromagnetic compatibility—limits—Limits—for harmonic current emissions(equipment input current≤16A per phase
GB 17625.1-2012 Electromagnetic compatibility—Limits—Limits for harmonic current emissions(equipment input current ≤16 A per phase)
GB 17625.1-2022 Electromagnetic compatibility—Limits—Part 1:Limits for harmonic current emissions(equipment input current ≤16 A per phase)
GB 17743-1999 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
GB/T 17743-2007 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
GB/T 17743-2017 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
GB/T 17743-2021 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
GB/T 2829-2025 Sampling procedures and tables for periodic inspection by attributes(Apply to inspection of process stability)
Related Standards
GB 19510.11-2004
Replaced
GB 19510.11-2004 Lamp controlgear—Part 11:Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps(neon tubes)
GB 19510.1-2004
Replaced
GB 19510.1-2004 Lamp control gear—Part 1:General and safety requirements
GB 19510.3-2004
Replaced
GB 19510.3-2004 Lamp controlgear—Part 3:Particular requirements for d.c.or a.c.supplied electronic step-down convertors for filament lamps
GB 19510.9-2004
Replaced
GB 19510.9-2004 Lamp control gear—Part 9:Particular requirements for ballasts for fluorescent lamps
GB 19510.12-2005
Replaced