GB/T 6492-1986
Active
GB/T 34932-2017
Replaced
National standards
GB/T 34932-2017 Technical specification for remote monitoring and control system of distributed photovoltaic power generation system
GB/T 34932-2017 Technical specification for remote monitoring and control system of distributed photovoltaic power generation system
Basic Information
Standard Code:
GB/T 34932-2017
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Solar energy
ICS Name:
Solar energy engineering
Publish Date:
2017-11-01
Implement Date:
2018-05-01
Pages:
16 pages
Scope
This standard specifies the technical requirements for the architecture and configuration of remote monitoring for distributed photovoltaic power generation systems, the functions of the main station, the requirements for the sub-stations, communication, the performance of the main station, the performance of the sub-stations, and the environmental conditions of the main station. This standard applies to the remote monitoring of newly built, modified, and expanded distributed photovoltaic power generation systems that are connected to the grid at voltage levels of 35 kV and below.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 2887-2000 Specification for electronic computer field
GB/T 2887-2011 General specification for computer field
GB/T 13729-2002 Remote terminal unit equipment
GB/T 13729-2019 Remote terminal unit equipment
GB/Z 19964-2005 Technical rule for connecting PV power station to electric power systems
GB/T 19964-2012 Technical requirements for connecting photovoltaic power station to power system
GB/T 19964-2024 Technical requirements for connecting photovoltaic power station to power system
GB/T 29319-2012 Technical requirements for connecting photovoltaic power system to distribution network
GB/T 29319-2024 Technical requirements for connecting photovoltaic power system to distribution network
DL/T 634.5101-2002 Telecommunications equipment and systems - Part 5-101: Transmission protocol specification for basic telecontrol tasks
DL/T 634.5104-2009 Transmission equipment and systems Part 5-104: Transmission protocol specifications using IEC 60870-5-101 network access with standard transmission protocol set
DL/Z 860.1-2018 DL/Z 860.1-2018 Electric power automation communication networks and systems Part 1: General introduction
DL/Z 860.1-2004 Substation communication networks and systems - Part 1: General introduction
DL/T 860.4-2018 Electric power automation communication networks and systems - Part 4: Systems and project management
DL/T 860.6-2012 DL/T 860.6-2012 Electric Power Enterprise Automation Communication Network and System Part 6: Communication Configuration Description Language Related to Intelligent Electronic Devices in Substation
DL/T 860.10-2018 Part 10 of the guidelines for electric power automation communication networks and systems: Conformance testing
DL/T 860.10-2006 Substation communication networks and systems - Part 10: Conformance testing
DL/T 860.71-2014 Power automation communication networks and systems - Part 7-1: Basic communication architecture principles and models
DL/T 860.72-2013 Power automation communication networks and systems - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI)
DL/T 860.73-2013 Power automation communication networks and systems - Part 7-3: Basic communication structure for public data classes
DL/T 860.74-2014 Electric power automation communication networks and systems - Part 7-4: Basic communication structure compatible logical node classes and data classes
DL/T 860.81-2016 DL/T 860.81-2016 Electricity automation communication network and system Part 8-1: Specific communication service mapping (SCSM) - Mapping to MMS (ISO 9506-1 and ISO 9506-2) and ISO/IEC 8802-3
DL/T 860.91-2006 Substation communication networks and systems - Part 9-1: Mapping of specific communication services (SCSM) on a unidirectional multipoint point-to-point serial communication link for sampled values
DL/T 860.92-2016 Electric power automation communication networks and systems - Part 9-2: Specific communication service mapping (SCSM) - Sampling values based on ISO/IEC 8802-3
DL/T 860.801-2016 Electric power automation communication networks and systems - Part 80-1: Application guidelines for exchanging information based on CDC data model using DL/T 634.5101 or DL/T 634.5104 switching system
DL/T 860.901-2014 Power automation communication network and system Part 901: Application of DL/T 860 in inter-substation communication. (Note: English translation provided)
DL/T 860.904-2018 Power automation communication networks and systems - Part 90-4: Network engineering guidelines
DL/T 860.7410-2016 Power Automation Communication Networks and Systems Part 7-410: Basic Communication Architecture for Monitoring and Control of Hydropower Plants
DL/T 860.7420-2012 Electricity enterprise automation communication network and system Part 7-420: Basic communication structure Distributed energy logic nodes
DL/Z 860.7510-2016 Power Automation Communication Networks and Systems Part 7-510: Basic Communication Architecture, Hydropower Plant Modeling Principles and Application Guidelines
DL/T 5136-2012 Nuclear Power Plant Secondary Circuit Design Technical Regulations
DL/T 634.5104-2002 Remote-control equipment and systems Part 5-104: Transmission protocols using the IEC 60870-5-101 network access subset for standard transmission protocol
DL/Z 860.2-2006 Substation communication networks and systems - Part 2: Terminology
DL/T 860.4-2004 Substation communication networks and systems - Part 4: System and project management
DL/T 860.6-2008 Substation communication network and system - Part 6: Communication configuration description language related to intelligent electronic devices in substation
DL/T 860.71-2006 Substation communication networks and systems - Part 7-1: Basic communication architecture and models for substation and feeder equipment
DL/T 860.72-2004 Substation communication networks and systems - Part 7-2: Basic communication structure for substation and feeder equipment - Abstract communication service interface (ACSI)
DL/T 860.73-2004 Substation communication networks and systems - Part 7-3: Basic communication structure for substation and feeder equipment - Public data classes
DL/T 860.74-2006 Substation communication networks and systems - Part 7-4: Basic communication structure for substation and feeder equipment - Compatibility of logical node classes and data classes
DL/T 860.81-2006
DL/T 860.92-2006 Substation communication networks and systems - Part 9-2: Mapping of specific communication services mapping (SCSM) to ISO/IEC 8802-3 to sample values only
GB 50174-2017 Code for design of data centers
DL/T 860.3-2004 Communication networks and systems in substations-Part 3:General requirements
DL/T 634.5101-2022 Transmission Protocol Basic Telecontrol Tasks-Part 5-101: Devices and Systems for Remote Operations Equipment Standards for Remote Operation Equipment and Systems。
Related Standards
GB/T 6494-1986
Replaced
GB/T 6494-1986 Measurement procedures for electrical characteristics of astronautic solar cells
GB/T 6496-1986
Replaced
GB/T 6496-1986 The general rules of astronautic solar cell calibration
GB/T 6497-1986
Active
GB/T 6497-1986 The general rules of terrestrial solar cell calibration
GB/T 12632-1990
Abolished
GB/T 12632-1990 General specification of single silicon solar cells
GB/T 12915-1991
Abolished