GB/T 31366-2015 Active National standards

GB/T 31366-2015 Technical requirements for monitoring and control system of photovoltaic power station

GB/T 31366-2015 Technical requirements for monitoring and control system of photovoltaic power station

Publish Date: 2015-02-04 Implement Date: 2015-09-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 31366-2015
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: Solar energy
ICS Name: Solar energy engineering
Publish Date: 2015-02-04
Implement Date: 2015-09-01
Pages: 18 pages

Scope

This standard specifies the technical requirements for the structure and configuration of the monitoring system for grid-connected photovoltaic power stations, system functions, performance indicators, and operating environmental conditions.
This standard applies to new, modified, and expanded photovoltaic power stations that are grid-connected at voltages of 35 kV and above, as well as those connected to the public power grid at a voltage of 10 kV.

Development Information

Word Count: 32 Thousand words Pages: 18 pages

Referenced Standards

DL/T 5149-2001 电力二次系统安全防护规定(国家电力监管委员会5号令 2005) GB/T 13729-2002 Remote terminal unit equipment GB/T 13729-2019 Remote terminal unit equipment DL/T 634.5104-2009 Transmission equipment and systems Part 5-104: Transmission protocol specifications using IEC 60870-5-101 network access with standard transmission protocol set DL/Z 860.1-2018 DL/Z 860.1-2018 Electric power automation communication networks and systems Part 1: General introduction DL/Z 860.1-2004 Substation communication networks and systems - Part 1: General introduction DL/T 860.4-2018 Electric power automation communication networks and systems - Part 4: Systems and project management DL/T 860.6-2012 DL/T 860.6-2012 Electric Power Enterprise Automation Communication Network and System Part 6: Communication Configuration Description Language Related to Intelligent Electronic Devices in Substation DL/T 860.10-2018 Part 10 of the guidelines for electric power automation communication networks and systems: Conformance testing DL/T 860.10-2006 Substation communication networks and systems - Part 10: Conformance testing DL/T 860.71-2014 Power automation communication networks and systems - Part 7-1: Basic communication architecture principles and models DL/T 860.72-2013 Power automation communication networks and systems - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI) DL/T 860.73-2013 Power automation communication networks and systems - Part 7-3: Basic communication structure for public data classes DL/T 860.74-2014 Electric power automation communication networks and systems - Part 7-4: Basic communication structure compatible logical node classes and data classes DL/T 860.81-2016 DL/T 860.81-2016 Electricity automation communication network and system Part 8-1: Specific communication service mapping (SCSM) - Mapping to MMS (ISO 9506-1 and ISO 9506-2) and ISO/IEC 8802-3 DL/T 860.91-2006 Substation communication networks and systems - Part 9-1: Mapping of specific communication services (SCSM) on a unidirectional multipoint point-to-point serial communication link for sampled values DL/T 860.92-2016 Electric power automation communication networks and systems - Part 9-2: Specific communication service mapping (SCSM) - Sampling values based on ISO/IEC 8802-3 DL/T 860.801-2016 Electric power automation communication networks and systems - Part 80-1: Application guidelines for exchanging information based on CDC data model using DL/T 634.5101 or DL/T 634.5104 switching system DL/T 860.901-2014 Power automation communication network and system Part 901: Application of DL/T 860 in inter-substation communication. (Note: English translation provided) DL/T 860.904-2018 Power automation communication networks and systems - Part 90-4: Network engineering guidelines DL/T 860.7410-2016 Power Automation Communication Networks and Systems Part 7-410: Basic Communication Architecture for Monitoring and Control of Hydropower Plants DL/T 860.7420-2012 Electricity enterprise automation communication network and system Part 7-420: Basic communication structure Distributed energy logic nodes DL/Z 860.7510-2016 Power Automation Communication Networks and Systems Part 7-510: Basic Communication Architecture, Hydropower Plant Modeling Principles and Application Guidelines DL/T 634.5104-2002 Remote-control equipment and systems Part 5-104: Transmission protocols using the IEC 60870-5-101 network access subset for standard transmission protocol DL/Z 860.2-2006 Substation communication networks and systems - Part 2: Terminology DL/T 860.4-2004 Substation communication networks and systems - Part 4: System and project management DL/T 860.6-2008 Substation communication network and system - Part 6: Communication configuration description language related to intelligent electronic devices in substation DL/T 860.71-2006 Substation communication networks and systems - Part 7-1: Basic communication architecture and models for substation and feeder equipment DL/T 860.72-2004 Substation communication networks and systems - Part 7-2: Basic communication structure for substation and feeder equipment - Abstract communication service interface (ACSI) DL/T 860.73-2004 Substation communication networks and systems - Part 7-3: Basic communication structure for substation and feeder equipment - Public data classes DL/T 860.74-2006 Substation communication networks and systems - Part 7-4: Basic communication structure for substation and feeder equipment - Compatibility of logical node classes and data classes DL/T 860.81-2006 DL/T 860.92-2006 Substation communication networks and systems - Part 9-2: Mapping of specific communication services mapping (SCSM) to ISO/IEC 8802-3 to sample values only DL/T 860.3-2004 Communication networks and systems in substations-Part 3:General requirements

Related Standards

Contact Us